Drummond 56599 Руководство пользователя и инструкции по безопасности - Страница 6
Просмотреть онлайн или скачать pdf Руководство пользователя и инструкции по безопасности для Водяной насос Drummond 56599. Drummond 56599 12 страниц. 1/4 hp submersible utility pump with fully automatic on/off operation
Печатать страницу
Connecting Check Valve
Screw the Check Valve into the pump outlet until tight.
Be sure the anti-airlock hole is pointing upward.
Connecting Debris Strainer
1. Align the pump base to the Debris Strainer
using the Switch Housing as a guide.
2. Guide the back of the pump (opposite
discharge) into the strainer. Once the back
of the pump is aligned push it down into the
strainer and rotate until it latches in place.
3. To remove the strainer, press to release
the latch and guide the pump out.
Notice: Always use the pump with the Debris Strainer
attached, to filter out debris and stabilize the pump.
Connecting Discharge Hose (sold separately)
1. If using a 3/4" hose, screw one end of
the hose to the Check Valve until tight.
To minimize leaks, use a hose that has a 3/4"
threaded connector and rubber gasket.
2. If using a 1-1/4" discharge hose, connect a
3/4" adapter (sold separately) to the hose.
Screw adapter to the Check Valve until tight.
Page 6
1-1/4" Discharge Hose
For technical questions, please call 1-888-866-5797.
Switch
Housing
Debris
Strainer
3. Place the other end of hose as needed to direct
the water discharge at least 3 feet away from the
source. Slope the discharge hose downward,
away from the source. Keep it as straight as
possible and secure it in place. Avoid walkways
and hazards, prevent tripping and hose from
being walked on, crushed or the outlet blocked.
3/4" Hose
with 3/4" Adapter
Handle
Anti-Airlock Hole
Check
Valve
Discharge
Base and
Inlet Screen
Latches
Item 56599