DRY AGER DX 500 Руководство по эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Холодильник DRY AGER DX 500. DRY AGER DX 500 17 страниц.
Также для DRY AGER DX 500: Руководство пользователя (14 страниц), Инструкции по замене (2 страниц)

Печатать страницу

DRY AGER DX 500 Руководство по эксплуатации

Control ON and OFF

Press the button once for 5 seconds and the OFF

symbol is displayed. The LED 4 (= standby)

The compressor is turned off. All relays are deactivated.

Press the button again and the compressor will restart.

Locking and unlocking Keypad

1. Press

and

of 3 seconds, POF appears for a few seconds

(POF = OFF parameter)

2. Thereafter, only displayed setting can not be

changed. Furthermore, the MIN and MAX values

can be viewed.

further activated.

UNLOCK

Press

and

hold the two keys for a minimum of 3 seconds.

Setting temperature

1. Press SET key: The set value is displayed and the

LED's flash

set

temp.

2. Now to change the settings, within 10 seconds,

use the

and

3. To confirm press SET button or wait 10 seconds

Start manual defrost

Hold down button for a min. 2 seconds

The manual defrosting starts.

Is indicated through LED3.

Turn On / Off UVC Desinfection

Press the button for at least 5 sec.

Is indicated through LED2.

and hold together, for a minimum

The ON / OFF switch can be

arrow keys

Error Messages

Reasons for

Message

error messages

"P1"

Room sensor error

Evaporation

"P2"

temperature

sensor Failure

"P3"

Humidity Sensor error

"HA"

High temperature alarm

"LA"

Low temperature alarm

"HHA"

HIGH humidity alarm

"LHA"

LOW humidity alarm

"dA"

Door alarm

Displays the alarm message until the alarm conditions exist. All

alarms are displayed alternately with the room temperature except

for the P1. EE can be acknowledged by pressing any key "rSt"

for 3 seconds in the display, then returns to normal operation.

Acknowledgement of the acoustic alarm

The audible alarm can be (optional) switched off by

pressing any key.

Alarm acknowledgement

Message P1, P2 and P3 after about 30 seconds; after correction

or troubleshooting, the error message disappears automatically.

Check probe sensor before replacing. Check connections.

Temperature alarms HA and LA will automatically reset once the

normal temperature is reached or when the defrost starts. DA

goes off when the door is closed. External alarms EAL and BAL

are disabled after the digital input. PAL acoustic alarm: Through

Device Turning off or standby ON / OFF.

Humidity alarms HHA and LHA are acknowledged automatically

when normal range has been reached.

Maintenace information

Information

Reason

Lifetime of UVC-bulb and active

"UVC"

carbon filter catridge are reached.

Please order the Dry Ager Service Kit and change the UVC bulb,

Art. DX0010 and Active Carbon Filter Catridge, Art. DX00110.

After exchaning you can reset the information:

and SET % RH and hold the keys for a minimum

1. Press

of 2 sec.

2. Select with button

Parameter UcH.

3. Press button SET % RH. The set value is displayed and

value is flashing.

4. With button

set the value to „0".

5. Confirm with button SET % RH.

6. After 1 minute the display switches automatically in

standard display.

Outputs

Cooling and Heating OFF

Defrost by time

moisture control OFF

regulation unaffected