Dry Flush Laveo DF1045 Руководство пользователя - Страница 6

Просмотреть онлайн или скачать pdf Руководство пользователя для Туалеты Dry Flush Laveo DF1045. Dry Flush Laveo DF1045 15 страниц. Portable toilet

Pictured to the right is the Refill Cartridge. The

Cartridge sits below the Trim Top. This is where

waste is wrapped and stored.

The Cut Outs are provided as a visual aid to align

your cartridge correctly within the Laveo. The

cartridge is installed into the Laveo with the Cut

Outs pointing to the rear of the unit.

The Bagging Material is a continuous tube of

material over 17' long. This proprietary material

is what locks the waste and smell away for up to

several months.

The Octagon Panel is used as a Key to ensure

that the Bagging Material twists during the flush

cycle. The Octagon Panel sits at the bottom of

the Octagon Container.

The next image shows the inside of the Laveo

with the Refill Cartridge and Trim Top removed.

The Foam Gasket assists in making a good seal

against the underside of the Refill Cartridge and

the lip of the Toilet Base. Should this gasket

become damaged it should be replaced. Contact

Dry Flush if you need to replace your Foam

Gasket.

The Octagon Container supplies rigid support to

the liner and bagging material while waste is

being stored within the Laveo. Simply lift the

Octagon Container up, and remove it from the

unit when you need to put a new liner in. The

container should not come in contact with waste

during normal usage, but if it does, you can clean

the container with the cleaner of your choice.