Anntlent AN-CPAL70 Plus Руководство пользователя - Страница 8
Просмотреть онлайн или скачать pdf Руководство пользователя для Удлинитель Anntlent AN-CPAL70 Plus. Anntlent AN-CPAL70 Plus 11 страниц. Cell phone signal booster
Печатать страницу
3D-FB Coaxial cable with N male connector
Notes：
Booster transmitting in 1710-1755 MHz should be install/operate in one of two ways:
(i) the antenna for the device must be installed to comply with the 10 meter above
ground maximum antenna height limitation OR
(ii) the antenna for the device has a 10 meter above ground maximum antenna height
limitation when the device is used with a handset that covers the 1710-1755 MHz band and
that owners could be subject to potential FCC enforcement action for noncompliance.
（3）Booster Installation
Do not place the equipment in direct sunlight or in an area that has abrupt
temperature and humidity changes .
it is suggested that the booster is installed in a cool，dry and ventilated room without
erosive gas and smoke.
Connect power adaptor to the booster， connect The other end of power adaptor to the
power outlet.
WARNING:
The input voltage for the booster is 5~12V DC. DO NOT use this Booster with a regular
power supply that NOT 5~12V DC . otherwise, it will be damaged and the user may also
be injured.
TROUBLESHOOTING AND SUPPORT
Problem
LED is not light
Resolution
1.Find an alternate power adaptor and try again.
2.Check the power outlet, the power adapter plug maybe is poor
connected.
3.If the problem is still not solved, please contact our company support
8 / 11