Dryflow JetForce Pro Руководство пользователя - Страница 3

Просмотреть онлайн или скачать pdf Руководство пользователя для Сушилка Dryflow JetForce Pro. Dryflow JetForce Pro 12 страниц.

Do not open the front panel.

This may cause an electric shock.

Supervise children at all times.

Do not let them play with the unit.

Do not use in a wet environment, for example, near a bath

or a shower where it may get direct water and places where

condensation may form, otherwise this may cause electric

shock and unit malfunction.

Do not allow the unit to get wet,

otherwise it will cause electric shock.

Do not modify and disassemble the unit unnecessarily.

Otherwise this may cause a fire, electric shock or personal injury.

Rated power is required.

If power tolerance is over +/- 10%, there will be breakdown.

If using incorrect power supply, fire, electric shock and

machine malfunction will happen.

Please, use dedicated socket.

If using together with other appliances, the socket

may cause abnormal heat leading to fire.

Power must be cut off during maintenance to prevent

the risk of electric shock.

Drain tank and air filter must be installed.

Do not switch on after power connected for 10 seconds.

If machine doesn't work or have abnormal conditions,

please, cut off power to prevent accidents; and close leakage

circuit breaker and ask supplier to check and repair, or it may

lead to fire because of electricity leakage and short circuit.

It must have a reliable grounding wire otherwise it may cause

electric shock risk when unit failure or leakage.

Attention when installing:

Do not install when the machine is connected to the power.

It must be installed by a professional person.

If the installation is incorrect, it may cause electric shock and fire accident.

This appliance is not intended for use by people (including

children) with reduced physical, sensory or mental capabilities,

or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the

appliance by a person responsible for their safety.

If the cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified people in

order to avoid a hazard.

For additional protection, the installation of a residual current

device (RCD) having a rated residual operating current not

exceeding 30mA is advisable in the electrical circuit supplying

the bathroom. Ask your installer for advice.

JetForce Pro