DS Produkte Q638759 Руководство по эксплуатации - Страница 3

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Кухонная техника DS Produkte Q638759. DS Produkte Q638759 6 страниц.

Печатать страницу

ITEMS SUPPLIED

•

Drain plug, 1 x

•

Cleaning block holder, 1 x

•

Cleaning block, 1 x

•

Button cell (LR54), 3 x

•

Operating instructions, 1 x

Check the items supplied for completeness and the components for

transport damage. If you find any damage, do not use the product

but contact our customer service department.

Remove any possible films, stickers or transport protection from the

product. Never remove the rating plate and any possible warnings!

AT A GLANCE

INSERTING / CHANGING BATTERIES

Before you use the product for the first time, pull the insulation strip

out of the battery compartment to activate the batteries.

If the performance of the LEDs diminishes, the batteries should be

replaced.

Before inserting the batteries, check whether the contacts are clean

and clean them if necessary.

1. Hold the product securely by the middle part (2) and unscrew

the top part (1) by twisting anticlockwise.

2. If you are replacing the batteries, take out the used batteries.

3. Insert three new batteries (1.5 V each). Ensure the correct

polarity (+ / –).

4. Screw the top part clockwise onto the middle part and screw

together hand-tight.

INSTALLATION AND USE

Please Note!

■

The product fits in standard sinks based on the EU standard.

■

The LEDs light up on contact with water.

■

The product must be adjusted so that the cleaning block holder

forms a flush connection with the eccentric rod in the drain. This

ensures that the drain can be opened and closed.

■

Do not press on the product to seal the drain! The height of the

product could be adjusted. Only open and close the drain using

the eccentric mechanism.

■

The film around the cleaning block is water-soluble and does

not need to be removed.

■

In spite of correct adjustment of the height, the product may

protrude further out of the drain in comparison to conventional

drain plugs.

■

It is possible that the water will drain away more slowly than with

conventional drain plugs.

1. Remove the previous drain plug from the sink.

2. Adjust the height of the product to suit the drain. To do this,

pull the cleaning block holder out of the top part of the drain

plug until the height you want is reached.

3. Place the product in the drain.

4. When the cleaning block is used up, replace it.

Replacement cleaning blocks are available from:

www.abflussfee.com

DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany • +49 38851 314650 *)

06430_DE-EN-FR-NL_A4_V2.indd 3

Article number: 06430

Top part with LEDs and

water sensor

Middle part

Cleaning block holder

Cleaning block

Customer Service / Importer:

*) Calls to German landlines are subject to your provider's charges.

Replacing the Cleaning Block

1. Remove the product from the drain.

2. Pull the cleaning block holder out of the top part of the drain plug.

3. Place the cleaning block with the film into the cleaning block

holder. We recommend that you use protective gloves when

handling the cleaning block.

4. Slide the cleaning block holder into the top part of the drain

plug and adjust the height to suit the drain.

5. Place the product back in the drain.

CLEANING AND STORAGE

•

Do not use any caustic or abrasive cleaning agents to clean the

product! These might damage the surface.

•

Wipe down the product with a slightly damp cloth regularly.

•

During cleaning the cleaning block holder may retract and lose

contact with the eccentric rod. Remove the product and adjust

the height again.

•

When it is not in use, you should store the product in a dry, clean

location which is out of the reach of children and animals.

TECHNICAL DATA

Article number:

06430

Model number:

Q638759

Power supply:

4.5 V DC (3 x LR54 button cell),

80 mAh

Protection class:

III

Type of protection:

IP67

ID of operating

Z 06430 M DS V2 0922 as

instructions:

DISPOSAL

Dispose of the packaging material in an environmentally

friendly manner so that it can be recycled.

The adjacent symbol (crossed-out bin underlined) means

that used devices should not be disposed of in the domestic

waste, but should instead be taken to special collection and

return systems.

Owners of used devices from private households can take

them free of charge to the collection points of the public

waste disposal authorities or the disposal points which are

set up by manufacturers and distributors under the Electrical

Equipment Act. Businesses which market electrical and elec-

tronic devices are also obliged to take back used devices.

Non-rechargeable and rechargeable batteries must not be

disposed of along with the household waste. Consumers are

legally obliged to separate and recycle non-rechargeable

and rechargeable batteries.

Non-rechargeable and rechargeable batteries can be taken

free of charge to a collection point of your local authority/

district or in shops so that they can be disposed of in an

environmentally friendly way and valuable raw materials can

be recovered. If they are not disposed of properly, toxic

ingredients may enter the environment and have harmful

effects on people, animals and plants.

Only dispose of non-rechargeable and rechargeable batteries

when they are discharged.

With non-rechargeable and rechargeable batteries that

contain lithium, cover the poles before disposing of them

to prevent a short circuit. A short circuit may cause a fire or

explosion.

Operating instructions

26.09.2022 09:54:28