Daily Youth GT5Ds Руководство - Страница 9

Просмотреть онлайн или скачать pdf Руководство для Беговая дорожка Daily Youth GT5Ds. Daily Youth GT5Ds 19 страниц. Dc commercial motorized treadmill

2. Instructions to display function:
2.1 "Incline /Pulse" Window: Displays the current slope value, with a slope display range of
segments. The system can automatically detect the heartbeat frequency of the sporter and display the
heartbeat value in this window when the sporter holds the heartbeat sensing handle with both hands.
The heartbeat value display range is 50-200 beats/minute. (This data is for reference only and cannot
be used as medical data.)
2.2 "Time"window: "FAT" will be displayed in the program selection for fat measurement mode.
The exercise time is displayed. The forward timing of the manual mode is from 0: 00 to 99: 59.
When the timing reaches 99: 59, the treadmill will slow down steadily and stop running, and the speed
window will display "End". The treadmill will enter the standby state 5 seconds after complete stop.
The forward timing of distance and calorie modes is from 0: 00 to 99: 59, and will be cleared after
timing reaches 99: 59 to continue operation. The countdown will decrease from the set time to zero.
When the countdown reaches 0: 00, the treadmill will slow down steadily and stop running. It will enter
the standby state 5 seconds after complete stop.
2.3 "Distance/Calorie" window:Display "P01-...-P12-U01-...-U03" and exercise distance in program
selection state;
Positive count-down is 0.00-99.00, nd it resets and continue to operate after overflow; reverse
count-down time decreases progressively from setting time to 0, and when it counts down to 0, the
treadmill steadily slows down, stops operation and displays "End". It enters into standby state when it
fully stops operation for 5 seconds.
Display exercise calorie. Positive count-down is 0.0-999.0, and it resets and continue to operate
after overflow; during reverse count-down, it counts down to 0, and when it counts down to 0, the
treadmill steadily slows down, stops operation and displays "End". It enters into standby state when it
fully stops operation for 5 seconds.
2.4 "Speed" Window: Displays the current speed value in the running state, and the metric speed displays
the range: 1.0-18.0KMH; The British speed range is 0.6-11.2MPH.
2.5 Large dot matrix window (hereinafter referred to as information window): a program diagram showing
the speed and slope during operation, and a 400-meter runway during operation in mode.
2.6 Maintenance Tips: The starting state is not bright, and the red light will be on after 100KM. Whether
the user does not manually clear the red light, the calculation will start from 0 after clearing. Press and
hold the "Speed+"key for a long time without putting a red light to prompt elimination.
3.Key function:
3.1 "Program Switching" is a program key: when it is in standby mode, press this key to circularly select
the built-in fixed program "P1-P2-...-P12- U01-...-U03-FAT".
3.2 "Target Setting" is the mode selection key: Press this key to cyclically select "0: 00", "30: 00", "1.00"
and "50.0" ("0: 00" is the manual mode, "30: 00" is the time counter mode, "1.00" is the distance
counter mode, "50.0" is the calorie counter mode.
slope addition and subtraction keys can be used to set the relevant count value. After the setting is
completed, press the "Start" key to start the treadmill.
3.3 "custom program" key: press this key to cycle through the "U01-U02-U03" custom program.
3.4
"Warm-up program" key: in standby state, press this key for three-minute (time window flashes)
warm-up. The treadmill operates with the speed of 1.0KM/H. press three-minute time count-down
and
gradually speed up to 6KM/H (maximum speed is 6.0KM/H). After completion of count-down,
the treadmill shuts down slowly. When it's in running "Warm-up program" state, press "Start/Pause"
key and leap over "Warm-up program". When it's not in Warm-up program" state, press "Start/Pause"
key to pause exercise.
) When selecting various modes, the speed and
-8-
0-18