DS18 CANDY-X1B Руководство пользователя - Страница 6

Просмотреть онлайн или скачать pdf Руководство пользователя для Усилитель DS18 CANDY-X1B. DS18 CANDY-X1B 16 страниц. Monoblock subwoofer / stereo full range class d amplifiers
Также для DS18 CANDY-X1B: Руководство пользователя (3 страниц), Руководство пользователя (16 страниц)

Печатать страницу

owner's manual

INSTRUCTIONS FOR FUNCTIONS AND CONTROLS

candy-x2b

1. HIGH INPUT: High level input terminals.

2. LOW LEVEL OUTPUT: A daisy chain output for connection to another amplifier with a low level input

using only a single RCA output from the source (head unit).

LOW LEVEL INPUT: For connection to any source (head unit) with a low level output. This is your RCA

output from the source (head unit).

3. GAIN: Knob for volume adjusment.

4. BASS BOOST: The boost ranges from 0dB to12dB

5. HPF: High pass frequency adjusting knob, the frequency ranges from 40 Hz to 250 Hz.

6. LPF: Low pass frequency adjusting knob, the frequency ranges from 50hz to150Hz.

7. X-OVER: Optional switches for high pass filter (HPF)/ full pass filter (FULL)/ low pass filter (LPF).

8. INDICATOR LIGHT: When power LED sends out blue light, it means that this amplifier have been

working now. When the LED sends out red light, it means that the self-protection of the amplifier.

9. GND: Ground terminal. Connect to the car chassis. Keep the lenght of the ground cable to a minimum.

10. REM: Terminal to be connected with the remote cable, which comes from the source and which

controls the amplifier switching on. Applied voltage must be between 10 and 15V DC.

11. +12V: anode of power connection terminals. Connect to the anode of car battery.

12. FUSE: standard automatic fuse, you must use the same power fuse if you need to change it.

13. SPEAKER: speaker connecting terminals.