Daintree GE Lumination LSA T1 Руководство по установке - Страница 3

Просмотреть онлайн или скачать pdf Руководство по установке для Аксессуары Daintree GE Lumination LSA T1. Daintree GE Lumination LSA T1 8 страниц.

CONNECT SUPPLIED

SENSOR CABLE

AC Line

Connect sensor cable to luminaire or accessory box.

If the sensor cable is not mounted on the knockout

plate, remove the knockout plate to access the

sensor cable. The luminaire or accessory box will

have a black and red cable with a male connector

located inside the electrical cavity. Remove a

knockout hole on the knockout plate. Follow

appropriate codes for type of grommet to be used

for the sensor cable to pass through the hole. NOTE:

The sensor cable connector may be mounted on the

outside of the knockout plate. In this case plug the

sensor cable in without removing knockout plate.

LOCATE SENSOR LOCATION

Depending on sensor mounting, route cable

through created hole in ceiling. Make sure sensor

is connected to the cable.

ROUTE SENSOR CABLE OUT OF

FIXTURE

Route the sensor cable through the knockout hole

and/or bushing into luminaire and make the

connection. Fasten the knockout plate back to

luminaire. All work happens above ceiling. The

luminaire does not have to be removed.

INSTALL SENSOR IN CEILING

Installation is complete

AC Line

appropriate

codes for type of

grommet to be

used.