Daintree WWD2-4SM Руководство по установке - Страница 6

Просмотреть онлайн или скачать pdf Руководство по установке для Системы управления Daintree WWD2-4SM. Daintree WWD2-4SM 7 страниц. Wireless controls wireless scene switch
Также для Daintree WWD2-4SM: Руководство по установке (7 страниц)

Печатать страницу
Daintree® Wireless Controls
Wireless Scene Switch(WWD2-4SM)

Technical Data

Product Specifications
Dimensions
Weight
Power Supply
Battery Life
Operating Environment
Status Indicator
Mounting
Warranty
Purpose of Control
Construction of Control
Type 1 Action
Pollution Degree 2
Product Availablity
SKU
93141336
Product Certifications
FCC ID: 2AS3F-WWD2SM
IC: 25008-WWD2SM
Operating Control
E486320
The alkaline batteries supplied with your wireless switch are prone to leak over their lifetime, particularly when the battery
is mostly depleted. In the event that your battery leaks alkaline into the battery compartment, the chemicals can damage
the metal terminals.The chances of this happening can be reduced by changing the batteries in the switch promptly when
the batteries are nearing their end of their useful life. If a battery leak should occur, however, it should be cleaned up to
prevent damage to the wireless switch.
WARNING: THE CHEMICALS LEAKED FROM ALKALINE BATTERIES ARE CORROSIVE. WHEN HANDLING LEAKING BATTERIES,
PROPER PERSONAL SAFETY EQUIPMENT SHOULD BE USED, INCLUDING RUBBER GLOVES AND EYE PROTECTION.
If it is discovered that the batteries have leaked, wearing rubber gloves and using eye protection, remove all of the batteries
from the battery compartment and seal them in a plastic bag. The bag should be discarded in a manner in accordance with
local laws and regulations. Then, using a small cloth lightly moistened with vinegar or other mild acid, carefully wipe all of
the leaked battery chemicals from inside the battery compartment and allow it to dry. Once dry, the batteries may be
replaced and the switch may be reinstalled.
114mm H x 70mm W x 15mm D
130g
(4) AAA1.5V battery
5yr(normal operation)
-10°C to 40°C (Indoor Use Only)
Network joined/Button triggered
Surface mount with either screw hole in backplate or with included 3M tape
5 years
Operating Control
Independently Mounted
DESCRIPTION
Wireless Wall Switch, Surface Mount, 4 Button, Battery
6
Installation Guide
ARTICLE
NO.
WWD2-4SM