Daintree GE Current WSA10 Руководство по установке - Страница 7
Просмотреть онлайн или скачать pdf Руководство по установке для Адаптер Daintree GE Current WSA10. Daintree GE Current WSA10 7 страниц. Sensor adapter
Печатать страницуDaintree
Networked General Purpose Adapter (WSA10)
®
9
FCC Warning Message
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and radiates radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encourage to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna;
• Increase the separation between the equipment
and receiver;
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected;
• Consult the dealer or an experienced radio/TV technician
for help.
WSA10
CAUTION
RISK OF EXPOSURE IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSAL OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.
Questions:
Web: products.gecurrent.com
Phone: 1-866-855-8629
These instructions do not purport to cover all details or variations in equipment nor to provide for every possible contingency to be met in connection with installation, operation
or maintenance. Should further information be desired or should particular problems arise which are not covered sufficiently for the purchaser's purposes, the matter should be
referred to GE Current, a Daintree company.
Input Voltage
Battery Backup
Operating Life:
Battery Life:
Inputs
Resistance:
Accuracy:
Voltage:
Accuracy:
Radio Properties
Operating
Environment
Compliance
Mounting
Dimensions
ControlScope
Manager
Compatibility
www.gecurrent.com
© 2021 Current Lighting Solutions, LLC. All rights reserved. GE and the GE monogram are trademarks of the
General Electric Company and are used under license. Information provided is subject to change without notice.
All values are design or typical values when measured under laboratory conditions.
DT104 (Rev. 05/14/2021
Installation Guide
Specifications
24VAC/VDC (10mA)
Type: AA 3.6V lithium thionyl chloride,
internal, not replaceable
7 years or more
Min. 5,000 hours (@25°C op. temp),
Backup operation only
(4) Thermistor, 10K Type 2
+/- 0.5°C @-10°C to 45°C (14°F to 113°F)
+/- 1°C @-30°C to 65°C (-22°F to 149°F)
(2) 0-10VDC
+/- 2% of span (without calibration)
2.4 GHz, +8 dBm, Range dependent on
RF propagation variables
Relative humidity 5% to 95%,
non-condensing
Temperature: 32° to 122°F (0° to 50°C)
US: FCC Part 15, Canada: IC
Wall, ceiling, enclosure screw mount
1.18" W x 0.98" H x 7.03" L
(30mm W x 25mm H x 178.5mm L)
Release version 3.1 or later