DSB DC-15 Инструкции

Просмотреть онлайн или скачать pdf Инструкции для Резаки для бумаги DSB DC-15. DSB DC-15 2 страницы.

Печатать страницу

How to operate Guillotine Trimmer

Fig-1

Place the trimmer on a stable, flat surface such as a table or desktop with the guillotine's

work surface upward.

The guillotine trimmer is locked, so you should press down on the lock button and move

the sliding handle backward to unlock it. Shown as Fig-1.

Lift the guillotine trimmer up.

Place material to be trimmed at the selected position under safety guard and press the

safety guard with one hand while cutting.

Press down on sliding handle with the other hand to cut. Shown as Fig-2.

Pess down on the lock button and move the sliding handle forward to lock the

guillotine trimmer after finishing work. Shown as Fig-3.

How to operate Rotary Trimmer

１．Place the trimmer on a stable, flat surface such as a table or desktop with rotary trimmer's

work surface upward.

２．Push and hold the cutting head to the top of guide bar.

３．Unscrew the paper press knobs and place material to be trimmed at

ld material securely in place with

４．Press down on cutter head and slide blade toward the other top of guide bar. Shown as

Fig-4.

５．Do not make a return trip cut with the trimmer. Always begin cutting from the top of

guide bar.

Fig-4

DC-15

Fig-2

Fig-3

Rotate

Fig-5

Choose the cutting style

1. Multi-functionality rotary trimmer including three styles: straight, perforation and wave.

2. Open the turning cover and turn the rotary button to choose the cutting style. The cutting

style is straight shown as Fig-5.and continue

perforation.

Replacement of the cutting mat

Cutting mat has four cutting positions (2 each side). When blade does not cut cleanly, you

cutting surface, please follow below replacement steps.

1. Move the cutter head to one end of the guide bar.

2. Remove cutting mat with one finger from the groove.

3. Insert the new cutting mat into original position.

position1

position2

Fig-6

Replacement of the cutter head

Fig-8

DC-15

Fig-7

Fig-9