Power 832 Version 2.0 Changes and Enhancements
Keypad Commands:
See Installation Manual section 3.4 "[ ] Commands"
[ ][2] Trouble Display
Trouble #7 – Device Low Battery
Trouble [7] will occur if any wireless device has a low battery condition. To find the specific
wireless transmitter with the low battery condition, press the [7] key once to display zones,
twice to display handheld keypads, or three times to display wireless keys with a low battery
condition:
Press [7] once ................ 1 keypad beep ................ Zones with a low battery condition will be
Press [7] twice ............... 2 keypad beeps ............... Handheld keypads with a low battery
Press [7] three times .... 3 keypad beeps ............... Wireless keys with a low battery condition will
[ ][5] Programming Access Codes
Access code attribute #4 (Escort5580 access) has been added. If enabled, the access code can be
used to access the Escort5580.
[ ][6] User Functions
User call-up (function [6]) has been added. The user can initiate a call to the downloading
computer by pressing [ ][6][Master Code][6].
Installer Programming
Section [000] - Keypad Assignment:
See Installation Manual section 3.5.1 "Function Key Options"
New function key options:
Option [19] - Command Output 3 [ ][7][3]
Option [21] - Command Output 4 [ ][7][4]
Function keys programmed with these options will allow easy activation of outputs programmed
as command output option 3 or 4.
Section [009], [010], [011] – PGM Output Programming:
See Installation Manual section 5.10 "PGM Outputs"
Changes to programmable output types:
Option [17] - Away Arm: output activates when the panel is armed in the away mode
Option [18] - Stay Arm: output activates when the panel is armed in the stay mode
Option [19] - [*][7][1] Command Output #1
Option [20] - [*][7][2] Command Output #2
Option [21] - [*][7][3] Command Output #3
Option [22] - [*][7][4] Command Output #4
NOTE: Command Outputs #1 to #4 may require an access code.
Option [23] - Silent 24-hour (PGM2 only)
Option [24] - Audible 24-hour (PGM2 only )
These options allow PGM2 to be used as an extra zone for silent or audible 24 hour input
(panic) applications. The panel will report the PGM2 alarm reporting code to central station.
displayed.
condition will be displayed.
be displayed.
Печатать страницу