DAITEM 172-21X Руководство по установке - Страница 2

Просмотреть онлайн или скачать pdf Руководство по установке для Датчики безопасности DAITEM 172-21X. DAITEM 172-21X 8 страниц. Infared motion detector
Также для DAITEM 172-21X: Руководство по установке (18 страниц)

Печатать страницу
1. Introduction
The infrared detector is used for protection inside buildings. Intruders are detected when the infrared radiation associated
with movement varies. The detector also detects freezing temperatures based on a thermostatic principle (a technical alarm
is triggered when the temperature drops below 5°C).
• 171-21X/175-21X: motion detector
(19 fields-of-view, 12 m, 90°) is
designed to protect rooms at risk
(lounge, main bedroom, etc.).
detection zone
(1
st
interruption)
detection zone
(2
0
2,20
0
2
4
6
8
10 12 m
2. Preparation
2.1 Opening
Open the detector casing by loosening
the screws using a cross-head
screwdriver.
Test button
Locking screw
• 172-21X: corridor detector (9 fields-
of-view, 22 m, 12°) is designed for
unavoidable passageways, and can
be placed facing the entry point to
be protected.
2,2m
1
0
2
4
6
nd
interruption)
2
2
0
0
5
5
2.2 Power supply
Connect the lithium battery pack according to the arrow.
Detection
lens
Test LED
indicator
lamp behind
lens
Guarantee sticker
Remove the pre-cut part of the sticker
and stick it to the guarantee certificate in
the user manual supplied with the control
panel. If you are adding the siren to an
existing system, use the guarantee
sticker provided with this product.
• 173-21X: curtain detector (9 fields-
2,2m
8
10 12
14
16 18 20 22
10
10
15
15
20 22
Alignment arrow
2
of-view, 12 m, 8°) is designed for the
protection of large surfaces (plate
glass windows, garage doors, etc.).
1
0
1
2
3
4
5
6
7
8
9
1
1
1
0
1
2
3
4
5
6
7
8
9 10 11 12
Removable tab
171 21X
171 21X
10 11 12
2 m