AirTies Air 4920 Руководство по быстрой установке - Страница 4

Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Сетевой маршрутизатор AirTies Air 4920. AirTies Air 4920 9 страниц. Home wi-fi mesh kit
Также для AirTies Air 4920: Руководство по быстрой установке (12 страниц), Руководство по самостоятельной установке (3 страниц), Быстрая установка Quide (8 страниц), Руководство по установке (2 страниц)

EXTEND YOUR WiFi COVERAGE (MESH):

In the room in which the router is located, position the new Air 4920 at a distance of around three

meters from the existing Air 4920 device, connect it in to the mains and wait until both 5 GHz

and 2.4 GHz LEDs are flashing green ( 4 seconds ON, 4 seconds OFF ). This may take up

to 3 minutes.

Existing Installation

MODEM

2.a

Press the WPS button (

then on the new Air 4920 for 2 seconds (2.b).

The 5 GHz and 2.4 GHz LEDs (

This process may take up to five minutes. The connection has been established once the ( )

LEDs light up green (The 5 GHz LED will turn OFF briefly once in every 5 seconds).

Congratulations, you have successfully configured your new device. Your existing

Air 4920 network credentials are automatically configured to your new Air 4920.

Note:

If the 5GHz LED on the new device does not light up green within five minutes,

please repeat step 2.

The new Air 4920 can now be unplugged and placed in the room of your choice.

The connection will be established automatically. This process will take up to three minutes.

Note:

If 5 GHz LED does not light up green (The 5 GHz LED will turn OFF briefly once in every

5 seconds) within three minutes, please consult the chapter «Troubleshooting» (page 5).

(Optional) Now, you can connect wired devices (in this example, the Set-Top Box) to the Air 4920

using the ethernet cable (yellow plug).

2 seconds

) on the existing Air 4920 (next to the router) for 2 seconds and

WPS

) start to flash and the devices connect automatically.

Set-Top Box

3 Meters

2 seconds