DSC WLS904-418 Инструкции по установке - Страница 4

Просмотреть онлайн или скачать pdf Инструкции по установке для Датчики безопасности DSC WLS904-418. DSC WLS904-418 4 страницы. Wireless motion

Battery Installation

• This system is designed to work with Eveready Alkaline Energizer

Batteries. Do not install any other type. The reliability of the security

system depends on its batteries, and "no name" or generic brand

batteries may not provide the best quality and dependability.

• Use fresh batteries. Most batteries have a "best before" date printed on

their packaging or on the batteries themselves. Buy batteries that have a

"best before" date of two years or more from your purchase date.

• When disposing of used batteries, follow the instructions and precautions

printed on the batteries. Many cities and communities have collection

sites or services for used household batteries. Contact your municipal

offices for information on the disposal of used batteries.

Remove the motion detector from its

mounting plate by holding the sensor by

its sides and pushing up. Install four

fresh Eveready Alkaline Energizer AAA

batteries. Be sure to insert the batteries

in the proper orientation. Replace the

sensor on its mounting plate, making

sure it snaps into place.

After all the batteries are installed, the detector will take 60 seconds to warm

up. During this time the LED will flash slowly.

Limited Warranty

Digital Security Controls Ltd. warrants that for a period of twelve months from the date of purchase,

the product shall be free of defects in material and workmanship under normal use and that in

fulfilment of any breach of such warranty, Digital Security Controls Ltd. shall, at its option, repair

or replace the defective equipment upon return of the equipment to its repair depot. This warranty

applies only to defects in parts and workmanship and not to damage incurred in shipping or

handling, or damage due to causes beyond control of Digital Security Controls Ltd. such as

lightning, excessive voltage, mechanical shock, water damage, or damage arising out of abuse,

alteration or improper application of the equipment.

The foregoing warranty shall apply only to the original buyer, and is and shall be in lieu of any and

all other warranties, whether express or implied and of all other obligations or liabilities on the part

of Digital Security Controls Ltd. This warranty contains the entire warranty. Digital Security Controls

Ltd. neither assumes, nor authorizes any other person purporting to act on its behalf to modify or

to change this warranty, nor to assume for it any other warranty or liability concerning this product.

In no event shall Digital Security Controls Ltd. be liable for any direct , indirect or consequential

damages, loss of anticipated profits, loss of time or any other losses incurred by the buyer in

connection with the purchase, installation or operation or failure of this product.

Warning: Digital Security Controls Ltd. recommends that the entire system be completely tested

on a regular basis. However, despite frequent testing, and due to but not limited to, criminal

tampering or electrical disruption, it is possible for this product to fail to perform as expected.

Printed in Canada 29003038 R001