DSC PC1550 Руководство по эксплуатации

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Клавиатура DSC PC1550. DSC PC1550 12 страниц. 4 digit master code
Также для DSC PC1550: Руководство по эксплуатации (17 страниц), Руководство по эксплуатации (17 страниц), Руководство по эксплуатации (17 страниц), Руководство по эксплуатации (9 страниц), Руководство по эксплуатации (17 страниц)

INSTRUCTION MANUAL DSC 1550

A WORD ABOUT YOUR SYSTEM

The PC1550 Security System has been designed to give you the greatest

possible flexibility and convenience. Read this manual carefully and become

familiar with the operation of your Security System. Your installer will tell you

which commands listed in this manual apply to your system. Fill out the SYSTEM

REFERENCE sheet in this manual and store it in a safe place for future

reference The label provided for the inside of the keypad door can be used to

record which sensors are on each zone.

IMPORTANT NOTE:

Remember that no security system can prevent

emergencies. It is only intended to alert you in case of an emergency and

should not take the place of prudent security practices or life and property

insurance.

It is important to test your system every week. To do this, first inform the

monitoring station that you are testing your system. Then, with the system

disarmed, activate all detection sensors one at a time and observe the zone light

come on at the keypad as each sensor is activated. Perform a bell test by

entering [*][6][Master Code][8] with the system disarmed. The PC1550 can be

programmed at the time of installation to automatically perform a test

transmission to the monitoring station on a regular basis. If the system has not

been programmed for this automatic lest, call the monitoring station for

instructions on how to perform a test transmission. Don't forget to inform the

monitoring station when you have finished your test. Check to see if the "Trouble"

light is on when arming the system. See the Trouble Display section in this

manual for a description of the different trouble conditions Contact your installer

for assistance if the trouble condition cannot be located and corrected.

HOW YOUR SYSTEM WORKS

Your Security System is made up of a control panel, one or more keypads, and

various detectors and sensors. The control panel will be mounted out of the way

in a utility room or basement. The metal cabinet contains the system electronics,

fuses and stand-by battery. There is normally no reason for anyone but the

installer to have access to the control panel. The keypad(s) have an audible

indicator, display lights and command entry keys. The keypad is used to send

commands to the system and to display the current system status. Keypads are

mounted in convenient areas close to the exit-entry doors. The security system

has up to eight zones or areas of protection. Each zone used will have connected

to it various sensors, such as door or window contacts, motion detectors, glass-