Foxfury Lighting Solutions RUGO 700-300 Руководство по эксплуатации - Страница 10

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Осветительное оборудование Foxfury Lighting Solutions RUGO 700-300. Foxfury Lighting Solutions RUGO 700-300 14 страниц.

Печатать страницу

MAINTENANCE

REPLACING THE O-RING (P/N 51-112)
1
1.
1
Separate the Power Pack from the Light Head (follow steps 1–2 in the
"Charging the Power Pack" section on page 5).
2.
Using a #2 Phillips head screwdriver (not included) remove the screw from
2
the Light Head (reference "Disassembled Light Head" diagram on page 3).
3
3.
The Retaining Tab and O-Ring can now be removed.
If the O-Ring does not fall out on its own when unscrewed, it may need
to be pulled out.
Examine the O-Ring for cracks. If cracks are found, a replacement will
be needed to ensure the Rugo
FOR RE-INSTALLATION, follow the above listed steps in reverse order.
NOTE: The O-Ring can be lubricated with a non-silicone based grease.
REMOVING THE GUARDS (P/N 51-905)
1
1.
1
Use a size T6 Star-Tip (TORX) driver or bit (not included) to take out the
screws on the top and bottom of the Rugo
2
2.
Once screws are loose, remove them and then lift up on the Guard to
remove it.
3.
3
Repeat steps 1–2 to remove the Guard on the opposite side of the Rugo
FOR RE-INSTALLATION, make sure to tighten the screws until they are snug.
10
2
waterproof rating.
™
2
3
O-RING
RETAINING TAB
3
.
™
.
™