Anslut 423-916 Руководство по эксплуатации - Страница 18
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Наружное освещение Anslut 423-916. Anslut 423-916 20 страниц. Wall lamp
Печатать страницу
EN
WARNING: Carefully read the safety instructions and make sure the power supply is disconnected
before installation. Follow the instructions below. Contact an electrician if you are unsure.
1.
Drill holes in the wall and insert plugs.
2.
Insert two self-threading screws through the plastic bracket as shown in the figure below.
3.
Screw on the plastic bracket.
4.
Strip off 6 mm of the insulation and leave 10 mm of insulated wire as shown in the
diagram below.
18
INSTALLATION
6 mm
A
10 mm