DSC Classic PC1565 Краткое руководство - Страница 14

Просмотреть онлайн или скачать pdf Краткое руководство для Панель управления DSC Classic PC1565. DSC Classic PC1565 18 страниц. Security control panels

Печатать страницу

Power Up

correct; and check voltage at the far

end. Disconnect furthest item on

Keybus and work back measuring

voltage. The panel will provide around

550mA of current for powering

modules and detection devices.

Always keep this in mind when ex-

panding a system.

You may be using a wireless module

with the Classic PC1565. Always

repower the control panel after adding

them onto the system. You will also

need to enable supervision, [*][8]

[Engineer Code][902[. Wait one

minute then enter [903]. The added

modules should now be displayed.

Push the [#] key when you have

finished. If a unit is not displayed in

the [903], check all of the connec-

tions for the unit.

Initial Start Up

Clearing Troubles

If the orange "Trouble" LED is lit,

there is trouble on the system. To

view, press [*][2].

The trouble condition will be dis-

played on the LCD keypad. Scroll

through the display using the [<][>]

keys to see if more than one trouble

condition is present.

On the LED keypads, the trouble

condition will be indicated by a lit LED

zone.

NOTE: Zone 1 LED gives a further

sub-menu of troubles. Therefore, if [1]

is lit, push [1] again for specific

information on the trouble condition.

Keypad Display After Pressing [*][2]

LED Lit LCD Display

[2]

AC Failure

AC no longer supplied to control

unit. To inhibit reporting of short

power-out durations, programme

delay in section [370].

[3]

Telephone Line Trouble

Telephone connection to control

panel reporting problem with

connection. Check telephone line

voltage and connection. Power

down with phone line connected.

Clearing Troubles

Features