Daiwa USJ-9050 Руководство по эксплуатации - Страница 9
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Массаж Daiwa USJ-9050. Daiwa USJ-9050 12 страниц. Massage lounger
Печатать страницу
SETUP
3. Connecting the Legrest
Locate and open the legrest.
Place the legrest in front of the main body of the massage chair.
First attach its cable to the body of the chair. Then insert the attachments from the
air hose into their corresponding slots on the chair.
On both the upper right and left sides of the legrest, insert a screw into the slot to
attach it to its corresponding side of the massage chair body.
Place all of the chair's other parts (seat cushion, back cushion, head cushion, etc.)
onto the main body of the chair. Make all the connections from the air hoses to their
appropriate slots on the body of the chair.
Coupling shaft
Screw
Coupling
shaft
Air tube port
Connection
wire plug
Air tube
Connection wire
SETUP
4. Connecting the Speaker System
Locate the Speaker System. Unzip the cover to reveal the connection slots within.
Locate the two short rods jutting out from either side of the chair's backrest, near the
top.Also locate thier corresponding slots on the inner portion of each speaker arm.
Locate the two screws on the
screwdriver (all included with the
chair's parts).Unzip the cover flaps on
both the right and left sides of the
speaker, and lift these flaps to expose
the screw holes near the bottom
screwdriver.
Allen
wrench
5. Installing the Controller Holder
Locate the wire coming from each
speaker on the speaker system. Connect
the wire from the right speaker to the
slot on the right side of the chair's
backrest. Repeat to connect the wire
from the left speaker to the slot on the
left side of the chair's backrest
Use the clips and the screws to securely
fasten the speakers to the left and right
sides of the backrest.
Fit the entire speaker system onto the top
of the chairs backrest, aligning the short
rods on either sides of the chair with the
slots on the speaker arms.
WARNING
This massage chair is categorized as a Level One
electrical appliance, and is equipped with a
three-prong (grounding) plug for your protection
against the hazard of electric shock. It should be
plugged directly into a properly-grounded, three-prong
receptacle.
Screws