DSC Power Series Руководство по установке - Страница 2

Просмотреть онлайн или скачать pdf Руководство по установке для Блок управления DSC Power Series. DSC Power Series 14 страниц. Neo image sensor
Также для DSC Power Series: Справочное руководство (2 страниц), Руководство (18 страниц), Краткое справочное руководство (2 страниц), Инструкции по установке (2 страниц), Краткое руководство (4 страниц), Руководство по установке (11 страниц)

• Batteries: Refer to the Batteries section for details

• Operating Temperature Range: 60° to 80°F

• Weight: 3.1 oz. (with batteries and without mounting accessories)

• Dimensions: 3.1'' h x 1.8'' w x 2.3'' d

• Supervisory Interval: 100 minutes (sensor), 3 hours (alarm hardwire)

• Wireless Signal Range: Greater than 400 ft open air

• Color: White

• Recommended Mounting Height and Angle: Refer to the Recommended Install Height and Angle Table

• Motion Profiles & Sensor Range: Refer to the PIR Sensitivity Settings Table

HARDWARE COMPATIBILITY REQUIREMENTS – By Panel

Panel

Impassa

PowerSeries Neo

Two-Way Voice Compatibility - Images cannot be transmitted while a Two-Way Voice call is in session. When the

Image Sensor is installed on a system with Two-Way Voice over the cellular network, image transmission during an

alarm may be interrupted by the two-way session. The image transmission resumes once the call has terminated.

Two parts to making the Image Sensor pet immune:

1. Set PIR sensitivity settings to "low",

2. Mount set at a height of 6 ft, and install the sensor with the 6 degree mounting angle.

BATTERIES

Battery type: The Image Sensor uses 2 AA 1.5v Energizer Ultimate Lithium batteries (UL compliant).

Expected Battery Life: Approximately 4 years with lithium batteries.

Voltage Thresholds: With lithium batteries, low battery alerts are issued at 3.05V. The sensor cannot operate when the

voltage reads below 2.30V.

Low Battery Notification: Panel will display a low battery alert for the sensor and/or notifications are issued via the

Alarm.com platform if the customer has subscribed to this notification type.

https://answers.alarm.com/Installation_and_Troubleshooting/Image_Sensor/DSC_PowerSeries_Neo_Image_Sensor/DSC_PowerSeries_

Panel Version

V1.3+

V1.0+

Module Firmware

Alarm.com SKU

Extra Hardware

3G8055(I) or CD8055(I)

SKU 3G8080(I) or

CD8080(I)

Updated: Tue, 17 Apr 2018 13:46:31 GMT