DSE RE-TCC5L Руководство пользователя

Просмотреть онлайн или скачать pdf Руководство пользователя для Камера безопасности DSE RE-TCC5L. DSE RE-TCC5L 3 страницы. Color wired cameras

Печатать страницу

OWNER'S MANUAL

Product description

RE-TCC5L it is a high performance camera for CCTV applications requiring the highest video

quality. E 'based on Sony CCD 1/3' ', able to combine high-resolution color with great night vision

capability.

Main features

SONY CCD 1/3 '' high resolution 600 TVL Minimum illumination 0.0045

Lux

function day / night to night vision B / W and compatibility with IR illuminators

Function DSS (Digital Slow Shutter). It allows viewing with minimal lighting, without the use

of IR illuminators. This technology is to hold in memory the video frame and condense them into a

single frame. The refresh time of the image decreases but increases the resilience with minimum

illumination.

WIDE DYNAMIC RANGE - Digital WDR feature allows better yield in backlit shots.

vertical and horizontal Mirror function for

tilting the image in the backward or shooting with camera upside

OSD (On Screen Display), via programming screen MENU controllable with rear buttons.

Titler for

Stamping number

camera

Connections

Video OUT

BNC connector for video output

DC 12V

Jack for 12VDC power supply

Auto Iris

Auto-iris lens connector

LED

Power LED

OSD

Buttons for control of OSD

BNC video output - Bottom right you connect a cable leading to monitors or management

devices typically using RG59 coaxial cable type and the like, and BNC connector.

Input for auto iris lens - The camera is able to command Direct Drive auto iris lenses.

DC12V - Connect 12VDC power supply by at least 1A with 5.5 mm plug with a positive

central STABILIZED, such as RE-AL4S model

Control buttons - with the central button to access the camera setup menu, with the other

buttons you move between menu items

Fixing - The camera is provided without bracket which must be purchased separately. The

thread for the bracket is available under the camera both above for ceiling mounting

Power to the camera

On the back of the camera there is a connector for the power supply

12VDC power supply by at least 1A with 5.5 plug

mm. center-positive, as the RE-AL4S model. Attention to use STABILIZED feeders that provide

12V in any load condition. The use of a different supply voltage from 12VDC can generate video

disorders and in the worst cases damage the camera.

If you carried out a centralized power pay attention to too long power cables, which could

introduce excessive voltage drop.

Connect the video

The video output is on the rear of the camera and has a BNC type connector. It must be

connected to the monitor or video management device. If the distance to be covered is a few

meters you can use any type of cable. But if you go over 10 meters we recommend using the

coaxial cable type RG59 or similar which also allows the wiring over a hundred meters.

the

Attach the lens

These cameras are supplied without lens so that you can equip with the lens more suited to the

size and to the ambient brightness. The attack to the target is C / CS type. The goal must be

purchased separately and is screwed on the front of the camera. If the lens is of the iris type

must be connected to the connector socket to the rear view camera. The camera is capable of

controlling autoiris Direct Drive goals. If you need to bring their own to the connector solder

these are the PIN to use:

PIN DIRECT

DAMP - 2

DAMP + 3

DRIVE + 4

DRIVE -

Once the lens is screwed, it is necessary to proceed to the focus adjustment. First, you must

adjust the focal distance from the CCD by acting on the threaded ring nut placed on the camera

body to obtain an acceptable vision. At this point it is possible to refine the vision by turning the

focus adjustment of the lens.

Programming Menu

Document: RE-TCC5L 1M0

Update: November 2010

RE-TCC5L Color Wired cameras

(POWER).

Need

connect a

Page: 1