DSE V340, T340, FM2WLED1B, FM2WLED4B Руководство пользователя - Страница 4

Просмотреть онлайн или скачать pdf Руководство пользователя для Передатчик DSE V340, T340, FM2WLED1B, FM2WLED4B. DSE V340, T340, FM2WLED1B, FM2WLED4B 4 страницы.

USER GUIDE
TURBO MODE
Press both buttons
+
off after 45/60/90/120 sec.
LED
(FLASHING LIGHT LOCATED ON ANTENNA — OPTIONAL)
The LED lights up when you first start the engine then goes out when the brake pedal is depressed. If it is not the case, contact your
installer.
*When the alarm and the starter kill are active, the LED will flash once every one second.
COLD START TIMER
1 - Press
+
buttons at the same time to enable this function, parking lights will flash 2 times to confirm for 2 hrs. Repeat same
for 3 hrs and for 4 hrs
2 - To cancel this feature, start the vehicle with the transmitter or with the key.
IMPORTANT: Do not use this feature when the vehicle is parked in a closed area.
SECURITY SWITCH ON/OFF
Leave the Security Switch (ON/OFF switch) to the OFF position to disable the operation of the remote starter (such as when indoor
parking or at car maintenance, etc...)
ON
OFF
Switch back to ON position for normal operation. OFF = No remote start ON = Yes remote start
VALET MODE (Override)
In the case of lost or malfunction of the transmitter, use this mode to bypass or override the alarm or the starter kill function.
a) turn the key to the Run (On) position
b) immediately within 6 sec:
1
press and release the override button
2
OR push and release the brake pedal at least or more than 6 times if that option is chosen
3
LED will stay On for 5 sec and Off for 5 sec continuously. Start with the key as usual. System is temporary suspended
IMPORTANT: To reset the system, repeat step a and b. You will hear 2 chirps and / or 2 parking flash to confirm.
MANUAL TRANSMISSION
The remote starter for manual transmission does not monitor the position of the gear shift. It requires the user of the vehicle
equipped with this remote starter for manual transmission to ac-tivate the parking brake or the hand brake and leave the gear shift
in the Neutral Position At All Time before leaving the vehicle even when he or she does not intend to remote start the vehicle.
The Manufacturer will not be liable for any consequences resulted from Misuse, Negligence or Improper installation.
RESERVATION MODE FOR MANUAL TRANSMISSION ONLY
The following sequences must be performed in order to remote start the vehicle equipped with a manual transmission (applicable for
Turbo as well):
1
While the engine is running, leave the gear shift in Neutral, apply the parking brake, remove foot from brake pedal
2
Press momentarily the
3
Remove the key, engine will remain running
4
Exit the vehicle, close the door, engine will then shut off with 1 chirp (if installed), door will lock & alarm is engaged
automatically after 6 seconds (if installed). The vehicle can now be safely remote started
Remark: However, the remote start function will be cancelled if a door is opened after step 4 has been complete. Once cancelled,
to re-initiate the remote start function:
- Start the vehicle with the key
- Repeat above step 1 to 4
IMPORTANT: When trying to remote start the vehicle and the car parking lights flashes 4 times without starting, repeat steps 1 to 4
*Optional
momentarily, park lights will flash 3 times. Remove the key, open and close door. Engine will shut
(EVERY 2, 3 OR 4 HRS FOR 6/10/15/20 MINUTES WHEN INSTALLED)
(LOCATE INSIDE THE VEHICLE)
button of the transmitter, parking light will turn and stay On, doors will unlock*
. You will hear 1 chirp and /or one parking flash to confirm (if installed)
WARNING
!
!