DSM omnicabsim Руководство пользователя - Страница 3

Просмотреть онлайн или скачать pdf Руководство пользователя для Оборудование для звукозаписи DSM omnicabsim. DSM omnicabsim 5 страниц. Tweakable cabinet simulator

Печатать страницу

Controls:

Gain: The gain control has a 0 to +12 dB of gain. It is used to compensate when the input level is too low. It is

recommended to keep the gain low and the input signal strong to improve Signal/Noise ratio.

Hi Response: This controls the high end roll off point of the speaker simulation. The range goes from a dark 1.5 KHz

roll off typical of subwoofers speakers, to 8 KHz, like an extended range speaker, going anything in between.

Hi Response range

Cab Size: This knob controls the theoretical size of the cabinet, as it moves the low frequency resonance up or down.

Smaller cabinets with smaller speakers tend to have a higher resonant peak than bigger stacks. The range goes from

small cabinets (1x8" style), at 180Hz up to huge 2X15" cabinet resonant frequency at 70Hz.

Cab Size Range

Resonance: This knob alters the intensity of the resonant frequency of the cabinet. Big closed back cabinets have a

very resonant peak at the low frequencies, in contrast, small open back cabinets have a mellower resonance. Note: if

the input signal contains a lot of low frequency content, maxing this control out may induce oscillation.