ATS-TN PAVDII Руководство по быстрому запуску и руководство - Страница 3
Просмотреть онлайн или скачать pdf Руководство по быстрому запуску и руководство для Аксессуары для телефонов ATS-TN PAVDII. ATS-TN PAVDII 13 страниц. Ats-tn pavdii personal assistance voice dialer ii
It is important that the receiving party of an emergency call
presses '0' to accept the call. If the emergency call is not
accepted, the telephone will call the next number from the
emergency number list.
NOTE: The system will continue to call the emergency contact
numbers, in sequence, over and over until someone accepts the
call or the call is terminated by the user.
After 1 minute 50 seconds, a beep tone will indicate the
emergency call will be terminated. The receiving party should
press 1+5 to add an extra 2 minutes to the call.
Once the receiving party has pressed 1+5 during the emergency
call (or after 1 minutes 50 seconds to extend the call for another
2 minutes), SOS function will be deactivated.
Once the receiving party has pressed 1+9 during the emergency
call, the emergency call will be terminated.
If the receiving party did not press 1+5 during the emergency
call after 1 minute 50 seconds, the SOS function will not be
deactivated and telephone will call the next number from the
emergency number list.
Each time a number is called, the system will dial for 1 minute.
If the system does not hear a receiver press '0' within 1 minute,
it will hang up and dial the next number.
NOTE: Calling can be stopped by pressing the Pendant button
again or the SOS button located on the phone
Page 22
In case of "EMERGENCY ON" you need to select the position
of this number (specifies in what order it will be dialed)
- Use ▲ or ▼ to select the position
- Press
to confirm
In case you want to overwrite an existing position, you will
have to confirm "OVERWRITE?" by pressing
STORING EMERGENCY MESSAGE
Press PRO
Press ▲ 4 x to select "RECORD MESSAGE"
, wait for beep, "VOICE" icon is
Press and hold
flashing
After the beep, say the message
Release the
button to finish the recording
Press PB/D to leave the menu
The maximum length of recording is '20' seconds
TEST EMERGENCY MESSAGE
Press PRO
Press ▲ 5 x to select "CHECK MESSAGE"
Press
to listen to the recorded message
Press PB/D to leave the menu
TEST SYSTEM OPERATION
First call your chosen emergency contacts to inform them
they are on your emergency contact list. Instruct your
contacts how to accept, extend and/or end the call with the
proper procedure. After they have been informed to press
0 to accept, 1+5 to extend and 1+9 to terminate, press the
Pendant button or the SOS button to perform an actual test.
Now you can proceed with other features (i.e. contact name
recording, etc.)
Page 3