ATTC LIGHTING AUTO MIG Gun Техническое руководство - Страница 7
Просмотреть онлайн или скачать pdf Техническое руководство для Сварочная система ATTC LIGHTING AUTO MIG Gun. ATTC LIGHTING AUTO MIG Gun 12 страниц. Fixed automation mig gun
Печатать страницуUNICABLE REPAIR / REPLACEMENT
STEP #1
•
Remove liner from gun (See Section 2.5 LINER REPLACEMENT).
Mount neck in vise.
•
•
Remove housing screws and slide housing back (front and back).
•
Loosen connector cone from neck using 1" (25 mm) wrench.
Remove from vise and thread out neck by hand.
•
Cable connection between cone and crimp ring should not be disturbed.
•
•
Unthread power pin and remove using 1 1/4" (32 mm) on connector cone and a 5/8" (16
or 3/4" (19 mm) wrench on power pin. Install new power pin.
Retrieve front and rear housing. Slide housings onto new unicable assembly.
•
•
Repeat procedure in reverse to assemble remaining components.
941-753-7557 • FAX:941-753-6917 • 800 342-8477 • [email protected] • www.AmericanTorchTip.com
REPLACEMENT
UNICABLE
USED UNICABLE
7
7
LIGHTNING
®