Atten AT6011 Руководство пользователя - Страница 3

Просмотреть онлайн или скачать pdf Руководство пользователя для Измерительные приборы Atten AT6011. Atten AT6011 12 страниц. Spectrum analyzers

Печатать страницу

Specifications

Frequency range: 0.15~1050MHz

10ppm/year

Stability:

Aging:

2ppm each year

Resolution of frequency display: 10kHz

(5 1/2 digit)

Readout accuracy:

2%* sweepwidth +5*

-3

10 *CF+10kHz

CF adjustment range: 0.15~1050MHz

Frequency synthesize: TCXO, DDS

Sweep width range: zero steps and 1-1000

MHz (1-2-5 steps)

10%

Sweep width accuracy:

Resolution bandwidth: 400kHz , 20kHz

Video-Filter bandwidth: 4kHz

Sweep time: 20ms

Amplitude specifications: 0.15~1050MHz

Range: -100dBm~+13dBm

Display: CRT, 8*10div

Display calibration: 10dB/div, logarithmic

Display range: 80dB (10dB/div)

Amplitude frequency response: 10dB

Attenuation, Zero Step, Resolution

Bandwidth 400kHz, Signal -17dBm:

4dB

LCD display: 2*16, Center frequency,

Sweep frequency width, Reference Level

Input attenuator: 0~40dB (4*10dB)

Accuracy (Input attenuation):

2dB/10dB

Reference level range: -27dBm~+13dBm

(each 10dB)

Accuracy: (Reference level) 500MHz (CF),

Zero step, RBW400kHz:

2dB

Average noise level:

-90dBm

(RBW20kHz VBW4kHz)

Third order intermod.: at -27dBm two

signal

3MHz apart:

-60dBc

2 harmonic suppression: -27dBm, 0dB

attenuation,

-50dBc

VSWR (Attenuation 10dB): typ. 1.5:1

Input/output

Signal input: N connector

Impedance: 50

Max. continuous RF input level:

10~40dB attenuation: +20dBm (0.1W)

0dB attenuation: +10dBm

Max. DC input voltage: 25V

DC output: DC power supply 6V FOR

AZ530 Probe

Audio output: 3.5mmö, speaker connector

Turning knob control: Center frequency

Tracking generator (AT6011 only)

Signal out put: N connector

Impedance: 50

Frequency range: 0.15~1050MHz

Output level range: -50dBm to +1dBm

Frequency response:

2dB

Output attenuator: 0 to 40dB (4*10dB)

Output attenuator accuracy:

2dB

Radio frequency interference (RFI):

20dBc

Others

Operation temperature: +10 ~+40

Storage temperature: -40 ~+70

Line Voltage range: 220VAC 10%, 50Hz

~60Hz

Size (W*H*D): 285*125*380mm

Weight: AT6010 about 8.0kgs

AT6011 about 8.5kgs

Near Field Sniffer Probes AZ530

(Optional)

Near Field Sniffer Probes AZ530 The AZ530

is the ideal toolkit for the investigation of RF

electromagnetic fields. Lt is indispensable of

EMI pre-compliance testing during product

development, prior to third party testing. The

set includes 3 hand-held probes with a built-in

pre-amplifier covering the frequency range

from 100KHz to over 1000MHz.

The probes-ove magnetic field probe, one

electric field probe, and one high impedance

Probe are all matched to the 50

inputs of

Spectrum analyzers or RF-receivers. The

power can be supplied either from batteries,

Ni-Cads or through a power cord directly

connected to an AT6010/AT6011 series

spectrum analyzer.

Signal feed via a 1.5m BNC-cable. When used

in connection with a spectrum analyzer or

measuring receiver, the probes cable used to

locate and qualify EMI sources, as well as

evaluate EMC problems at the breadboard and

prototype level. They enable the user to

evaluate radiated fields and perform shield

effectiveness comparisons. Mechanical

screening performance and immunity tests on

cables and components are easily performed.

Specifications

Frequency range: 0.1~1000MHz

(lower frequency limit depends on type)

Output impedance: 50

Output connector: BNC-jack

Input capacitance: 2Pf

(high impedance probe)

Max. In put level: +10dBm

(without destruction)

DC-input voltage: 20V max

Supply Voltage: 6VDC

4AA size batteries

Supply-power of Analyzer

Supply Current: 8mA (M-Field Probe)

5mA (E-Field probe)

24mA (High imp probe)

Probe Dimensions (W*D*L):

40*19*195mm

Housing: Plastic

(electrically shielded internally)

Package contents: Carrying case

1 H-Field Probe

1 E-Field Probe

1 High Impedance Probe

1 BNC cable (1.5m)

1 Power Supply Cable

(Batteries or Ni-Cads are not included)

The H-Field Near-Field probe

The H-Field probe provides a voltage to the

connected measurement system which is

proportional to

the magnetic radio

frequency (RF) field

strength existing at the

AZ530-M

probe location, With this

probe, circuit therefore sources may be

localized in close proximity of each other. The

H-Field will decrease as the cube of the

distance from the source, A doubling of the

distance will reduce the H-field by a factor of

eight (H=1/d ). where d is the distance.

In the actual use of the H-field sensor one

observes therefore a rapid increase of the

probe's output voltage as the interference

source is approached. While investigating a

circuit board, the sources are immediately

obvious. It is easily noticed which component

(i.e.IC) causes interference and which does not.

in addition. by use of a spectrum analyzer the

maximum amplitude as a function of

frequency is easily identified. Therefore, one

can eliminate early in the development

components which are not suitable for EMC

purposes. The effectiveness of

countermeasures can be judged easily. One can

investigate shields for eaking areas and

cables or wires for conducted interference.

The High-Impedance probe

The high-impedance probe (Hi-Z) permits the

determination

of the radio

frequency

interference (RFI) on

AZ530-H

individual contacts or

printed circuit traces. It is a direct-contact

probe. The probe is of very high impedance

(near the insulation resistance of the printed

circuit material) and is loading the test point

with only 2pF (80

at 1GHz). Thereby one