Attero Tech Dante unD6IO-BT Руководство пользователя - Страница 12
Просмотреть онлайн или скачать pdf Руководство пользователя для Аксессуары Attero Tech Dante unD6IO-BT. Attero Tech Dante unD6IO-BT 19 страниц. Bluetooth multi-i/o wall plate
4 – Device Features and Settings
The unD6IO-BT is designed use in a number of configurable modes to facilitate comprehensive use in professional AV
applications. The following sections describe the available modes and their functionality.
4.1 – Bluetooth® Pairing/Connect Modes
4.1.1 – Manual Mode
This usage model is intended for applications where casual users of a public venue
(sports bar, spa, stadium luxury box, fitness center) have access to connect their
devices to the audio system but headaches are minimized by eliminating automatic
reconnect and pairing history features.
In this mode, users connect their Bluetooth® audio enabled smart device by simply
pressing the front panel "PAIR" button. The blue Bluetooth® status LED will begin
flashing to indicate that the unD6io-BT is now visible to other Bluetooth® devices and
accepting pairings. This pairing period lasts 30 seconds after which the status LED will
stop flashing and turn off and the un6IO-BT will disable its Bluetooth® interface.
*Note: The default Bluetooth friendly name visible to other devices is "unD6IO-BT".
This name can be customized by the installer using the unIFY Control Panel software.
If a successful pairing is made during the pairing period, the status LED will stop
flashing and turn constantly on.
To disconnect a Bluetooth device from the unD6IO-BT, press and hold the PAIR button
for 5 seconds and then release it. The status LED will turn off, and the connection will
be reset. Another device may now be connected by repeating the pairing process.
4.1.2 – Reconnect Mode
In this mode, the unD6IO-BT maintains a list of the last 10 paired devices and any
previously paired device on that list will be permitted to reconnect when in range of
the unD6IO-BT without requiring the front panel button to be pressed. The user simply
selects the unD6IO-BT friendly name on their smart device.
Any new devices that are paired are added to the paired device list. If the list already
full, a random device from the list will be removed and the new device added in its
place.
4.1.3 – Exclusive Mode
This mode is intended for restricted/personal use and works similarly in operation to reconnect mode. However, rather
than allow any known device from the pairing list to reconnect, only a specific device can be used with that particular
unD6IO-BT.
To setup a device as the exclusive device, set the unD6IO-BT to "Exclusive" mode, clear the pairing list, and then pair the
desired exclusive device to the unit. The unD6IO-BT makes a note of this device and from that point on, only that exclusive
device will be allowed to reconnect to that particular unD6IO-BT when in range. As with the reconnect mode, reconnection
is done without requiring the front panel button to be pressed by simply selecting that particular unD6IO-BT on their
smart device.
Once the unD6IO-BT has been associated with a device, both the front panel pair button and the remote "pair" command
sent via the network are disabled and will have no effect.
In order to attach a different device, either pairing list has to be cleared or the device mode needs to be changed.
© Attero Tech LLC 2018
Page 11
unD6IO-BT
User Manual
Figure 7 – Indications
when pairing
614-00033 Rev 01_c