Attero Tech ZIP4-3G Руководство пользователя - Страница 8
Просмотреть онлайн или скачать pdf Руководство пользователя для Микрофон Attero Tech ZIP4-3G. Attero Tech ZIP4-3G 16 страниц. Ip audio 4-button paging station
Печатать страницу2.3 – Mounting
A typical installation will involve mounting the Zip4 wall plate into a pre-mounted wall box, wall mounting bracket, or desktop enclosure.
Before installation, make sure the wall box where the Zip4 is to be installed is pre-wired with a suitable cable back to a PoE-enabled network
switch or mid-span injector. If a mid-span injector is being used, the cable should be connected to the port that supplies both Ethernet and
power (refer to the mid-span injectors manual if unsure which port is which).
Figure 2 - In-Wall Mounting
Figure 3 - On-Wall Surface Mount (shown w/accessory box)
Figure 4 - Desktop Mount (shown w/accessory kit)
1315 Directors Row Suite 107 Fort Wayne, IN 46808 ⁞ (260) 496-9668 ⁞ www.atterotech.com
*Note: All Attero Tech products are tested using UTP cabling and
it is recommended that UTP cabling be used when installing them.
STP cabling can be used for installation though care must be taken
not to introduce grounding issues into the system by creating a
ground loop by doing so.
Attach the network cable from the switch/mid-span injector to the
Ethernet port of the Zip4. If the switch or mid-span injector is
already running and PoE is enabled, the unit should power up and
the backlight around the zone buttons should turn on.
With the cable attached, carefully place the Zip4 into the wall box
taking care to not trap the cabling. Once fully in place, secure the
front plate with the screws provided.
2.4 – Mic Hanger Options
The standard Zip4 product includes a latching metal microphone
clip. A magnetic mic solution is available as an accessory and
requires both the wired PTT with magnetic mic hanger and the
mounting plate. The mounting plate is installed by removing the
top mounting screw securing the mechanical hanger and
replacing it with the magnetic mic mounting plate.
Figure 5 – Zip4 w/ Magnetic Mic Hanger Plate
Page 8