DSS2 ECO-1,5 Руководство - Страница 4

Просмотреть онлайн или скачать pdf Руководство для Контроллер DSS2 ECO-1,5. DSS2 ECO-1,5 4 страницы. Microprocessor, transistor speed controller

DSS2 ECO-1,5

v3 – MICROPROCESSOR, TRANSISTOR SPEED CONTROLLER – MANUAL

v.1.1 / II-2017

LED No. 8, Restoring factory default settings

To restore the factory default settings, in the 1

service menu level select

the No. 8 diode and push the ON/OFF button to enter the edit mode.

By pressing the UP button, select the function to restore factory default

settings – No. 1 LED lights up.

Confirm the selection by pressing the ON/OFF – it will cause the regulator

to exit the service mode (all LED line LEDs light twice and the regulator

turns off). All editable parameters are reset to their default values.

8. ELECTRICAL CONNECTIONS AND DIMENSIONS

WARNING! Pay special attention to the connection of the regulators power

cord (L, PE, N). Connecting inconsistent to the description (e.g. replacing

"L" with "N") can lead to the appearance of the voltage at the motor

terminals, despite the fact that the regulator main switch is set to an off

position!

Fig. 5. Dimensions of DSS2 ECO-1.5

Fig. 4. Connection diagram of the regulator with DEN11 module or

potentiometer

DASKO Electronic ul. Do Studzienki 34B, 80-227 Gdańsk /Poland/ , tel: (+48) 58 3459107

4/4