DStv A6 Руководство пользователя - Страница 9
Просмотреть онлайн или скачать pdf Руководство пользователя для Пульт дистанционного управления DStv A6. DStv A6 10 страниц. Dstv remote
Также для DStv A6: Руководство пользователя (13 страниц)
Печатать страницу
Timed Sequence (Option 2)
Use this option if you need the steps to take place in a timed sequence (with specific time lapses between each step).
Example : you need the i-plate to disappear before another step on your macro can be programmed.
Step 1
Press and hold down ARC and the number button you
want the macro on.
Step 2
While continuing to press down ARC, release the
number button.
Step 3
Then press the number button again (you're now
holding down both ARC and the number button)
Step 4
Release both buttons.
The A6 is now in "listening mode" and the following steps should be done in "real" time (Example : if you
need 20 seconds between going to a channel and changing the subtitles setting, wait 20 seconds after the
channel change).
Step 5
Press the first button in your macro sequence
Step 6
Repeat step 2 for each button press in the macro
sequence (you can only have 10 steps per macro),
remembering to include time lapses.
Step 7
Press HELP to end the programming of your macro.
If the A6 LEDs give two RED blinks at any time - something has gone wrong and you will need to start the
programming sequence from Step 1
To use macros on the A6 remote
Press ARC and the number button of the
macro you want to use.
Remember that you must start your macro from the same place it was programmed.
Example : you set a macro that starts when the highlight is on the Advanced Search
screen. In order to use this macro, you must be on the Advanced Search screen when you
press ARC and the number the macro is on.
Hint : remember to keep the remote control pointed at the necessary devices for the
duration of the macro.
DStv Remote A6 (Advanced Options)
.
The LED below i will be
LED below BACK will give an
for each step of the macro.
The A6 LEDs will go
AMBER
within three seconds.
The A6 LEDs will blink AMBER.
The A6 LEDs will be solid AMBER.
The A6 LEDs will blink
continuously.
The A6 LEDs will give one
blink and then the LEDs will blink
AMBER
continuously.
If the A6 LEDs give two
blinks, something has gone wrong
and you will need to start again
from Step 1.
The A6 LEDs will give three
GREEN
blinks, confirming that
you have successfully completed
the programming sequence.
GREEN
and the
AMBER
AMBER
GREEN
RED
blink
Page 9 of 10