DStv Walka Краткое руководство - Страница 6
Просмотреть онлайн или скачать pdf Краткое руководство для Портативный телевизор DStv Walka. DStv Walka 8 страниц. Handheld tv
Также для DStv Walka: Краткое руководство (12 страниц)
Печатать страницу
- 1. Table of Contents
- 2. Introduction
- 3. Dstv Mobile Walka
- 4. Step 1: Familiarise Yourself with the Hardware
- 5. Step 2 : Charging Your Walka
- 6. Step 3 : Activate Your Walka
- 7. Step 4 : Basic Operation
- 8. Step 5 : Advanced Operation
- 9. Channel Scan
- 10. Resetting Your Walka
- 11. Updating the Rmware
- 12. Changing the Time Zone
Information Plate (iPlate)
The iPlate will provide you with the channel title, start and
end time and short synopsis of the programmes you are
currently watching. It also allows you to change channels.
To access the iPlate
1. Click on the selection wheel.
2. You will now be presented with the iPlate at the
bottom of the screen.
3. Scrolling up or down with the Selection Wheel whilst
viewing the iPlate will allow you to see the synopsis
for programmes on other channels currently playing.
4. To select a channel press the Selection Wheel in.
5. To exit the iPlate click on the Menu/Power button.
Channel Scan
In the event you lose DVB-H reception while in a coverage
area, you will be able to re-acquire the signal by rescanning
for channels, do the following:
1.
Extend the antenna.
2.
Click on the Menu/Power button.
3.
Click the scroll wheel to select the Channel Scan option.
4.
Click on Channel Scan.
5.
You will be prompted to con rm your selection.
6.
Click OK.
7.
Channel Scan will begin, and once complete will
connect to the last channel viewed.
8.
Do not turn o the device while the Channel Scan is
in progress.
Resetting the Walka (Soft reset)
If you experience an error with your Walka, you can reset it.
To do this, you will need to locate the reset point on the left
side of the device. Insert a paper clip into the hole. Once the
device screen goes to black, remove the paperclip and the
device will restart.
RESET
5