DT Research DT395BV Руководство по эксплуатации - Страница 3

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Планшет DT Research DT395BV. DT Research DT395BV 4 страницы. Mobile pos tablet
Также для DT Research DT395BV: Руководство по эксплуатации (9 страниц)

Печатать страницу

DT395BV

OPERATION

Internal Battery

Warning!

The Internal battery pack should only be replaced by an authorized DT Research service

representative. Please contact your product and/or service provider for internal battery

replacement service.

Powering ON and OFF

To activate the DT395BV, push and quickly release the Power Button. The display will

come on in a few seconds. To put the DT395BV in Standby mode, push and quickly release

the Power Button. To turn the DT395BV oﬀ for extended storage, power oﬀ safely using

any software function that "shuts down computer" provided in the software operating

system.

NOTE:

The battery packs shipped with your tablet may be low in power—please use the

AC-DC adapter with the DT395BV when setting up for the ﬁrst time to fully charge

the internal battery pack. You may charge the external battery pack with it attached

to the DT395BV, or with the optional external battery charger kit.

NOTE:

When the battery pack(s) is (are) charging, the blue-colored Battery LED should

blink slowly. If plugging in the AC-DC adapter does not trigger this blinking activity

and the LED stays dark, the battery pack(s) may have been drained substantially. Try

unplugging/ replugging the AC-DC adapter to the DT395BV a few times to activate the

charging process.

NOTE:

To conserve power, use (push and quick release) the Power Button to put in

"Standby" mode while not in use. Pushing brieﬂy on the same button will wake up

the system within seconds.

NOTE:

Avoid using the Power Button ("hold 4+ seconds" feature) to turn oﬀ the tablet—this

form of hardware shutdown is intended to be a means of recovery from lockups, and

not as normal operation.

ENGLISH

Start Up

If the power up (from Standby or otherwise) is successful, the appropriate interface will

be displayed after a launch sequence of several seconds. The wireless LAN connection

may take 10-15 seconds to be established.

Conﬁguring the DT395BV

The tablet may be conﬁgured using the utilities and methods dictated by the software

operating system. The DT395BV should be conﬁgurable for various properties such as

user proﬁles, network features, and several system elements.

Wireless Networking

Wireless LAN

The DT395BV is often delivered with an embedded (user-inaccessible) 802.11ac WLAN

adapter equipped with a hidden custom antenna.

• hrough the support of typical WLAN adapters, the DT395BV should be able to

detect all 802.11 access points in the vicinity for you to select the access point of

your choice for connection.

• he SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT395BV and the ac-

cess points have to match. The SSID is case-sensitive and it is recommended that you

enable WEP/WPA/WPA2 encryption (or advanced alternatives) for secure access.

•

hen WEP/WPA/WPA2 is enabled, you may need to consult your network admin-

istrator or your networking equipment literature to properly conﬁgure associated

settings such as Authentication mode, etc.

• efer to the access point operating manuals for setting up the 802.11 access points.

ENGLISH