DT Research DT590BU Руководство по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Медицинское оборудование DT Research DT590BU. DT Research DT590BU 2 страницы. Medical-cart computer
Также для DT Research DT590BU: Руководство по эксплуатации (2 страниц)
Печатать страницу
DT590BC/ DT590BU/ DT592BC/ DT592BU/ DT594BC/ DT594BU
Precautions
•
Always exercise care when operating and handling the
•
Never disassemble any portion of the enclosure, as this will void any product warranty on the
Medical Cart Computer.
•
Do not use any AC/DC adapter other than the one provided with the device or a replacement
acquired from the manufacturer.
•
In the unlikely event that smoke, abnormal noise or strange odor is present, immediately power
down the Medical Cart Computer and disconnect all power sources. Please report the problem
to your device provider immediately.
Basic Features
The Medical Cart Computer integrates a bright 19", 22", or 24" display with a high performance
system, USB ports, and integrated options such as capacitive touch, hot-swappable batteries, and
smart card reader for a comprehensive point-of-care solution.
Powering ON and OFF
If your Medical Cart Computer comes with the battery packs, please open the battery slot caps and
then put in the battery packs one by one. If not, please use the AC-DC adapter with the Medical
Cart Computer for the power supply. To activate the Medical Cart Computer, push and quickly
release the Power Button and the display will come on in a few seconds. To put in Standby mode,
push and quickly release the Power Button. To turn off for extended storage, power off the device
safely using any software function that "shuts down computer" provided in the software operating
system.
NOTE:
The battery packs shipped with your device may be low in power—please use the AC-DC adapter with the Medical
Cart Computer when setting up the device for the first time to fully charge the battery packs. You may charge the
battery packs with them attached to the Medical Cart Computer, or with the optional battery charger kit.
NOTE:
When the battery pack(s) is (are) charging, the blue-colored Battery LED should blink slowly. If plugging in the
AC-DC adapter does not trigger this blinking activity and the LED stays dark, the battery pack(s) may have been
drained substantially. Try unplugging/ replugging the AC-DC adapter to the Medical Cart Computer a few times to
activate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Button to put the device in "Standby" mode while not
in use. Pushing briefly on the same button will wake up the system within seconds.
NOTE:
Avoid using the Power Button ("hold 4+ seconds" feature) to turn off the device—this form of hardware shutdown
is intended to be a means of recovery from device lockups, and not as normal operation.
NOTE:
If connecting an external monitor (via HDMI-out) to the Medical Cart Computer, you must power the computer
with the adapter.
2
ENGLISH
Medical Cart Computer.
Power/Battery LED Status
•
Blue indicates the battery is 25% to 100% charged
•
Blinking blue indicates the battery is charging
•
Orange indicates that the battery is between 11% to 25%
•
Blinking Orange indicates that the battery is below 10%
Battery Indicator
Wireless Networking
Wireless LAN
The Medical Cart Computer is often delivered with an embedded (user-inaccessible) 802.11ac
WLAN adapter equipped with a hidden custom antenna.
•
Through the support of typical WLAN adapters, the Medical Cart Computer should be able to
detect all 802.11 access points in the vicinity for you to select the access point of your choice for
connection.
•
The SSID and WEP/WPA/WPA2 (if enabled) parameters on the Medical Cart Computer and the
access points have to match. The SSID is case-sensitive and it is recommended that you enable
WEP/WPA/WPA2 encryption (or advanced alternatives) for secure access.
•
When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator or your
networking equipment literature to properly configure associated settings such as Authentication
mode, etc.
•
Refer to the access point operating manuals for setting up the 802.11 access points.
Bluetooth
The Medical Cart Computer features a built-in Bluetooth adapter that operates on the Microsoft
Windows Bluetooth protocol. The Bluetooth configuration application is invoked from the System
Tray or from the Control Panel. Follow the instructions and options provided within the application
to configure and invoke Bluetooth connectivity with the corresponding peripherals.
NOTE:
Bluetooth devices or accessories that are not compatible with the Microsoft Windows Bluetooth protocol may not
work with the Medical Cart Computer.
Battery Indicator
3
ENGLISH