DT SWISS RATCHET EXP OS Техническое руководство - Страница 8

Просмотреть онлайн или скачать pdf Техническое руководство для Переключатель DT SWISS RATCHET EXP OS. DT SWISS RATCHET EXP OS 20 страниц.

2.5 DISMOUNTING THE BEARING ON THE NON DRIVE SIDE

1. Tap out the ball bearing on the non drive

side with a plastic hammer with slight

hammer strokes onto the axle.

2. Remove the ball bearing from the axle.

1. Using a slotted screwdriver with a blade

width of about 2.5 mm, slide under the hub

seal into one of the notches of the ratchet.

2. Turn the screwdriver 90° around its

longitudinal axis and push the hub seal out

of its seat.