DTC T-2071-M Руководство - Страница 6

Просмотреть онлайн или скачать pdf Руководство для Передатчик DTC T-2071-M. DTC T-2071-M 17 страниц.

TIPS

PULL UP ON SECTION INDICATED

TO RELEASE LOCK AND REMOVE

Note: This is a push-on, pull off

locking connector. The connector

will rotate 360° in the transmitter

without disconnecting. Use

extreme caution when connecting

or removing the noodle antenna.

To remove pull the noodle antenna

straight out.

Battery Operation:

Always remove battery when not in use. It is imperative to

discard partially used batteries, as their remaining life is not

predictable. Always start an operation with fresh batteries.

Audio Circuit and Body Mounting Tips:

All body-worn transmitters are susceptible to "clothing noise".

Reducing this rubbing effect is accomplished in a variety of ways.

Secure the transmitter to the body with an ace bandage or a custom

harness.

Try to locate the microphone in an area where "pickup" will be

best and rubbing noise is least. Avoid the arms, legs, crotch,

under the arms or waist area. Front torso mounting is ideal.

Always provide a small amount of strain relief on the micro

phone cable itself. This reduces the noise caused by the

microphone cable and element being tugged and prevents

cable damage.

Secure the microphone cable to the body with medical adhesive

tape in at least two spots, the final being about an inch below the

element. Remember to leave a strain relief loop!

Completely cover the microphone element (facing outward) with

an ordinary Band Aid™. This provides a damped baffle for the

microphone and a slick surface for clothing to rub on, and

actually does not impact audio pickup level at all.