Attop A8 Руководство по эксплуатации - Страница 3

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Дроны Attop A8. Attop A8 5 страниц.

Печатать страницу

Speed Adjustment

Press the speed switch to change the speed gear while

Speed ±

flying. There are 3 gears, press the Speed switch, you will

hear "beep, beep", means it is on the second gear speed.

Press again, you will hear "beep, beep, beep" means it is on

the third gear speed. Press again, you will hear "beep"

means it is back to the first gear.

Remark: Beginners would be suggested to use the first

8. Return-to-home function

In regular mode, when the drone fly forward, stand and make sure the remote toward the tail of

drone then press the "Right function switch" to activate headless mode, no matter which direction

that the drone heading to, keep pressing the "Right function switch" about 3 seconds, the drone

would fly straight back to remote location.

Note : 1. The drone will not land itself when operate this function, just fly straight toward the remote

direction, negative direction operate the right stick to stop flying.

2. If you change your position while playing, Return-to-home function will be inaccurate.

Now turn the drone's tail toward the remote, then press the "Right function switch" to

activate headless mode, and keep pressing the "Right function switch" about 3 seconds,

then It will come back successfully. Or you can also face to the dorne's tail and calibrate

the gyroscope after it lands. Such operation is to update the drone's return direction.

10.Photograph and Video

Take Photos

Take Photos：Press the button of "take photo". Please make sure to open the app on your

smart phone before using it, then you can review the photos taken in the media

file of app.

Video：Press the button of "take video", press to start and press again to finish and save

the video. Please make sure to open the app on your smart phone before using it,

then you can review the videos taken in the media file of app.

11.Aircraft Parameters

Propeller dia.:

Aircraft:

Total weight:

Battery:

Charging time:

Flight time:

Gyroscope:

Working temperature:

Remoter controller:

Motor:

Remote Controller Parameters

Effective Control Range:

Wifi Transmission Range :

(in a wide open area with no electromagnetic interference)

Working frequency:

gear speed firstly to play until skillful.

Video

100mm

301X301X70mm

90g±2g

3.7V950mAh

About 120 mins

10 mins

Built-in

-10°C to 40°C

2.4G

8*26 4pcs

50 meters

30-40 meters

2.4G

Battery:

3xAAA

9.Headless Mode Function

Press the "Right function switch". When the indicator lights are slowly flashing, the drone is in

Headless Mode.

Press the "Right function switch" again. When the indicator lights stop flashing, the Headless Mode

is diactivated.

Front

Back

Headless Mode

Users are recommended to stay same orientation as the drone head is facing when

the drone takes off.

Headless Mode, the forward direction is same as the direction when the drone took off,

where the head of drone was facing.

In order to make sure the users can clearly identify drone's direction, we suggest that

users better stay in the same orientation as the drone facing when it takes off.

Then no matter which direction the head is facing, the drone will lock the controlled

direction as the remote controller, easy to control back the drone.

12. FAQ

ISSUES

After the battery is

insertedin the drone,

Frequency matching

indicator lights on

between remote and

drone keep flashing,

receiver not successful

no response to

operations

1.Check if the power

for remote and drone

No response after

is full charged.

battery is inserted in

the drone

2.Connection of the

poles are not good

Motor does not run

when operating the

Power for the Li-Poly

throttle stick and the

battery is not enough

indicator lights on

drone keep flashing

1. Some of the blades

Main motor blades

have been deformed

spin but the drone

2. Battery power is

won't fly

not enough

Front

Back

Origin

Headless Mode

CAUSE

SUGGESTIONS

Reoperate the frequency

matching for remote

and drone (please refer

to P.4 for details)

1.Open the remote

battery case and make

sure if the battery is

inserted in right position

2. Use a fully charged

battery

3. Reinstall the battery

and confirm whether it is

good connecting with the

poles well.

Charge the battery or

replace it with a

full-charged battery

1. Replace the main

blade

2. Charge the battery or

replace it with a fully

charged battery