Attwood 11401-4 Инструктивный лист

Просмотреть онлайн или скачать pdf Инструктивный лист для Морское оборудование Attwood 11401-4. Attwood 11401-4 2 страницы. Pontoon storage block set

Печатать страницу

Pontoon Storage Block Set

Instruction Sheet

69536 RevA

5/14

READ AND SAVE THESE INSTRUCTIONS

WARNING

THIS PRODUCT IS NOT INTENDED FOR USE BY CHILDREN

WARNING

This product contains a chemical known to the state of California to

cause cancer and birth defects and other reproductive harm.

Description

Quantity

- Pontoon storage block

1 - Set (4 individual blocks)

- Instruction Sheet

Remove all parts from packaging. Verify that all parts are present

prior to use.

WARNING

• Read all instructions thoroughly prior to use.

• This product is designed specifically for pontoon storage only.

• The pontoon storage blocks are not designed to be used

stacked together.

• Ensure that proper precautions are taken to prevent unlevel

loading of the storage blocks.

• Use caution at all times when trailering, loading and unloading

your boat.

• Examine components periodically to ensure that the storage

blocks show no sign of wear or degradation and are in good

working order. Discontinue use immediately if any signs of wear

or degradation exist.

• Check with your manufacturer for recommendations on the

number and locations of pontoon storage blocks to be used under

your type and length of pontoon tubes to provide proper support.

(If you have a three tube type pontoon the center tubes will need

to be supported as well.)

• Failure to follow these instructions and warnings could result in

injury and/or death.

Instructions for use:

Congratulations on purchasing the Attwood Pontoon Storage Block

Set. This unique product has been designed to give you years of

worry free storage for your pontoon. The lightweight yet strong

supports are engineered to provide stable, secure seasonal storage.

Attwood's Pontoon Storage Blocks are not only rugged, but also UV

and moisture resistant.

1016 North Monroe Lowell, MI 49331

#11401-4

1. Determine location for the storage of your pontoon. The location

should be level and on stable ground that will support the weight of

your craft while not allowing the supports to "sink" into the soil.

2. As in any storage location, make sure your pontoon has plenty of

clearance from any building or landscaping to avoid damage to

property or to your craft from storing under eaves of building or

possible dropping branches, etc.

3. Simply place your pontoon in your chosen location and locate

the blocks at the desired positions. Please note the positioning

and spacing of the blocks will depend on the size and style

of your pontoon. Check with your pontoon manufacturer for

recommendations on spacing and number of Pontoon Storage

Blocks to utilize for your pontoon.

4. Place your pontoon on to the blocks (4000lb max each) and make

final adjustments if required to assure a secure and stable loading

on the blocks.

5. It is recommended that normal measures are taken to properly

secure the pontoon down to prevent movement of the craft while

in storage.

Care and Maintenance:

To ensure years of use please follow these simple recommendations

for cleaning and storing your Attwood Pontoon Storage Blocks.

1. Clean and wash off the pontoon blocks with a garden hose to

remove soil and dirt from the surface of the blocks.

2. Allow to thoroughly dry.

3. Inspect and examine blocks to ensure they show no signs of wear

or degradation and are in good working order. Discontinue use

immediately if any signs exist.