dtm KEYPOINT Руководство по сборке и эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Руководство по сборке и эксплуатации для Клавиатура dtm KEYPOINT. dtm KEYPOINT 16 страниц. Wireless code keypad

3. Assembly

The keyboard is delivered with batteries packed

individually, not placed in the device. The batteries should

be placed in the battery basket on the electronics board

inside the housing (see section 11.2 Battery replacement).

Before installing the device, check the radio range of the

keypad. To do this, add the keyboard to the receiver, in

accordance with the manual. The receiver and the

keyboard must be in the target place, if the range is

suﬃcient for the stable operation of the devices, you can

install the keyboard.

The keyboard should not be installed in metal housings or

near metal objects. Remember about reducing the range

when the battery is used up. The keyboard can be

mounted indoor and outdoor.

The keyboard has a handle that is easy to install, into

which the housing is inserted. Fasten the holder with the

included mounting pins. After inserting the keyboard into

the holder, screw in the provided torx screw from the

bottom and put on the housing cover. The assembly

method is shown in Figure 1.