Comtrend Corporation PG9141s-PoE Руководство по быстрой установке - Страница 2
Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Адаптер Comtrend Corporation PG9141s-PoE. Comtrend Corporation PG9141s-PoE 7 страниц. Powerline ethernet adapter with wifi
Печатать страницу
NOTE:
An additional PowerGrid 9142s (or PG-9141s or PG-
9141s-PoE unit) and Ethernet cable are required for each
additional device (e.g. PC, Camera, Access Point) that you
wish to connect to the network, with a minimum of 2 units
required for setup.
A. Initial Setup
NOTE: These steps show how to connect a PowerGrid 9141s unit to a
modem or router. This guide assumes that a PowerGrid 9141s will be
the primary connection to the modem/router and the PowerGrid 9142s
will be used within the network to connect to a WiFi capable device (e.g.
Tablet, IP Phone, Access Point).
1. Ensure that your modem or router is powered on.
Plug a PowerGrid 9141s unit into the power outlet closest to the
2.
modem/router. The Power LED will blink
Connect the PowerGrid 9141s unit to the LAN port of the
3.
modem/router with an Ethernet (RJ-45) cable. Wait 10 seconds for
the PowerGrid's ETHERNET LED and POWER LED to light up
GREEN
indicating a stable connection.
Introduction
GREEN.
Page 2