Comtrend Corporation CT-5611T Руководство по настройке - Страница 3

Просмотреть онлайн или скачать pdf Руководство по настройке для Модем Comtrend Corporation CT-5611T. Comtrend Corporation CT-5611T 10 страниц.

c. Mount the filter over the wall jack lugs and slide down to attach.

d. Fully insert the telephone into the filter jack.

e. Mount the telephone over the filter lugs and slide down to attach.

Connecting the Comtrend CT 5611-T to Computer

4. Connect the Yellow Ethernet (LAN 10/100M) cable to the back of the

modem.

5. Connect the power cable to the back of the modem and to the power outlet

or surge protector.

6. Verify that the modem Power button is in the On position.

7. Connect the telephone line to the DSL port on the modem.

a. You should use the telephone line that was previously attached to your

computer for dial-up Internet service, if available.

b. The phone line should run directly from the wall jack to the back of the

modem. There should be no splitters or filters (except for the splitter filter

provided), surge protectors, fax machines or any other equipment on that

line.

c. DO NOT place a filter (other then splitter filter provided) on the jack where

the DSL modem will be connected.

8. Verify that the proper lights are lit on the front of the modem.

a. The power light should be lit and solid.

b. The ADSL Link light should be lit and solid.

c. The LAN Link light should be lit and solid.

d. The Internet light should be lit and solid but may blink rapidly when surfing

the Internet.

Figure 2: Rear of Comtrend 5611-CT Modem

Reset