Comtrol RocketLinx ES7510 Руководство по быстрой установке - Страница 6

Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Переключатель Comtrol RocketLinx ES7510. Comtrol RocketLinx ES7510 8 страниц. Industrial 10-port gigabit managed poe plus switch

Печатать страницу

Connect the Relay Output

If desired, connect the alarm relay output

(DO). The relay contacts are energized (open)

for normal operation and close for fault conditions

that can be defined using the RocketLinx

ES7510 user interface.

Note: The relay contact only supports a

maximum of 1A at 24VDC. Do not apply

voltage and current that exceeds

these specifications.

RocketLinx ES7510 Configuration

You can configure the RocketLinx ES7510 network information

(IP address, subnet mask, and gateway or DHCP) using one of the

following methods:

 NetVision

 Web browser

 Command Line Interface (CLI) using one of these methods:

- Serial console port by connecting the RS-232 console cable that was

shipped with the RocketLinx ES7510 to a system COM port

- Telnet

- Secure shell (SSH)

The default IP address of the RocketLinx ES7510 is 192.168.250.250.

This document discusses using NetVision to program the network information into the

ES7510 and a web browser to begin feature configuration. You can refer to the RocketLinx

ES7510 User Guide, if you want to use one of the other configuration methods.

1. If necessary, install the latest version of the Java Runtime Environment on

your PC.

Note: NetVision is available on the RocketLinx CD or you can download the latest

version from the Comtrol ftp site.

Maximum Relay

Current 1A@24VDC

Extra Alarm

Power Source

Alert

Device