Aube Technologies TH106 Руководство пользователя - Страница 2
Просмотреть онлайн или скачать pdf Руководство пользователя для Термостат Aube Technologies TH106. Aube Technologies TH106 8 страниц. Programmable thermostat
Также для Aube Technologies TH106: Руководство пользователя (3 страниц), Руководство пользователя (13 страниц), Руководство пользователя (3 страниц)
Печатать страницу
TH106, TL6160 PROGRAMMABLE THERMOSTAT
1. Connect the thermostat wires to the line wires and to
the load wires using solderless connectors for copper
wires.
2-wire installation
4-wire installation
2. Push any excess wire back into the electrical box.
NOTE:
If necessary, before re-installing the front compo-
nent, configure the thermostat (see section 3).
3. Return power to heating system.
69-2202—07
3. Configuration
The configuration switches are on the
back of the thermostat. The factory
settings are indicated by the gray cells
in the following table.
SW1
a
Early Start
SW2
Display format
SW3
b
Cycle length
SW4
c
Keypad lock
a. Early Start can be used in Automatic mode only.
When this function is enabled, the thermostat cal-
culates the optimal time to start heating in order to
obtain the desired temperature by the set time. The
thermostat re-assesses the start time daily based
on the previous day's performance.
b. You must select 5 minutes if you have a fan-forced
heater. The word FAN is displayed when this setting
is selected. Select 15 seconds for better tempera-
ture control in most other cases.
c. The settings are locked. The temperature adjust-
ment buttons only allow you to view the tempera-
ture setpoint.
4. Clock and Day Setting
1. Press the Hour button to set the hour.
2. Press the Min button to set the minutes.
3. Press the Day button to set the day.
4. Press the Mode button to end.
Daylight Savings Time
The thermostat can automatically re-adjust its clock at
Daylight Savings Time changeover. When this function is
enabled (On), the thermostat switches to Daylight Savings
Time on the second Sunday of March and to normal time on
the first Sunday of November.
NOTE:
The function is disabled (default setting) when the
clock loses its setting.
1. Press the Day button (3 seconds) until DLS
appears on the screen.
2. Press either of the
between On (enabled) and Off (disabled).
3. Press the Day button briefly. The year setting
is displayed.
4. Press either of the
rent year.
5. Press the Day button briefly. The month set-
ting is displayed.
6. Press either of the
rent month.
7. Press the Day button briefly. The date set-
ting is displayed.
8. Press either of the
rent date.
9. Press the Mode button to end.
2
Off
On
°C / 24-hour
°F / 12-hour
15 seconds
5 minutes
Baseboard
Fan-forced
heater
heater
Off
On
buttons to toggle
buttons to set the cur-
buttons to set the cur-
buttons to set the cur-