ABSTRACT Universal Руководство по эксплуатации - Страница 17

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для DJ оборудование ABSTRACT Universal. ABSTRACT Universal 19 страниц.

Abstract Universal Instruction Manual

Dipswitch settings

The Abstract CE controller can show you a picture of how the dip switches

should be set. If you are using this controller, ignore the settings below.

Settings for all heads if not listed below

Settings for Twister 4

Settings for ClubColour & DuoColour

The dipswitches are set in binary code (1=switch 1 on). To work out how you

need to set the dipswitches to get a certain channel number, use the following

step-by-step procedure:

Step 1: Is number more than 256? If so turn switch 9 on and subtract 256.

Step 2: Is resulting number more than 128? If so turn switch 8 on and subtract 128.

Step 3: Is resulting number more than 64? If so turn switch 7 on and subtract 64.

Step 4: Is resulting number more than 32? If so turn switch 6 on and subtract 32.

Step 5: Is resulting number more than 16? If so turn switch 5 on and subtract 16.

Step 6: Is resulting number more than 8? If so turn switch 4 on and subtract 8.

Step 7: Is resulting number more than 4? If so turn switch 3 on and subtract 4.

Step 8: Is resulting number more than 2? If so turn switch 2 on and subtract 2.

Step 9: Is result 1? If so turn switch 1 on.

If you have a calculator which can display binary, just convert the channel

number to binary and turn on the '1' bits (switch 1 is the right hand bit).

Page 17