3onedata IPS215-4POE Руководство пользователя - Страница 2
Просмотреть онлайн или скачать pdf Руководство пользователя для Переключатель 3onedata IPS215-4POE. 3onedata IPS215-4POE 4 страницы. Ips215 series. industrial poe switch
Печатать страницу
1. Ground screw
2. Power input terminal block (3 bits)
3. DIP switches
4. DIN-Rail mounting kit
5. Power indicator
6. PoE state indicator
7. System running indicator
8. Link/ACT indicator
9. 10/100M Base-T(x) PoE port
10. 10/100M Base-T(x) port
11. 100M Base-FX optic fiber port
【Power supply input】
The product top panel provided 3 bit power supply input terminal
block, support DC input. Voltage input (1, 3) range is 45～
55VDC. The power supports reverse polarity protection.
【Dimension】
The series of products are the same size, and the type of the
Ethernet interface is different. Unit (mm)
IPS215-4POE
IPS215-F-4POE
【DIP Switch】
Top panel provided 4 bits DIP switch to do function configure
(ON to enable effective). 1 is RJ45 port support pause frame flow
control and the optic fiber port support back press flow control. 2
is force mode (RJ45 10M), but optic fiber port speed unchanged.
3 is VLAN function that port 5 with port 1-4 can communication,
but between ports 1 to port 4 cannot communication. 4 is keeping
for future function. Please power off and power on when you
change the status of DIP switch.
【Communication connector】
10/100BaseT(X) Ethernet port
The pinout define of RJ45 port display as below, connect by UTP
or STP. The connect distance is no more than 100m. 100Mbps is
used 120Ωof UTP 5, 10Mbps is used 120Ωof UTP 3 ,4, 5.
- 2 -
RJ45 port support automatic MDI/MDI-X operation. can
connect the PC, Server, Converter and HUB .Pin 1,2,3,6
Corresponding connection in MDI. 1→3, 2→6, 3→1, 6→2 are
used as cross wiring in the MDI-X port of Converter and HUB.
10Base-T/100Base-TX are used in MDI/MDI-X, the define of Pin
in the table as below.
1
8
NO.
MDI signal
MDI-X signal
1
TX+
RX+
2
TX-
RX-
3
RX+
TX+
6
RX-
TX-
4, 5, 7, 8
—
—
Note: "TX±" Transmit Data±, "RX±" Receive Data±, "—" Not use.
10/100Base-T(X) MDI (straight-through cable)
10/100Base-T(X) MDI-X (Cross over cable)
MDI/MDI-X auto connection makes switch easy to use for
customers without considering the type of network cable.
100Base-FX Fiber port