Abstract Data ADE-32 OCTOCONTROLLER Руководство пользователя - Страница 8
Просмотреть онлайн или скачать pdf Руководство пользователя для Музыкальное оборудование Abstract Data ADE-32 OCTOCONTROLLER. Abstract Data ADE-32 OCTOCONTROLLER 18 страниц. Control, modulation, triggering and pattern module with 12 output types individually assignable to 8 simultaneous outputs.
Также для Abstract Data ADE-32 OCTOCONTROLLER: Руководство пользователя (11 страниц)
Печатать страницу
6) Knobs
1) TEMPO
The TEMPO knob sets the master tempo for the entire module. It is active when the module is running
under the internal clock and disabled when the module is running under external clock.
The clock divisions/multiples for all outputs are set from this tempo.
The tempo can be changed from 20 to 270 BPM. The 2 blue LEDs to the right of this knob indicate
BAR and BEAT respectively with a slightly longer flash at the first beat of each 64 beat/16 bar cycle.
2) OUTPUT: SELECT
The OUTPUT: SELECT knob selects an output to edit.
Each of the 8 outputs has a blue LED marked 'E' (Edit) to the upper right that will illuminate to
indicate the output that is being edited as you turn this knob.
3) OUTPUT: TYPE
The OUTPUT: TYPE knob assigns an output type to the selected output.
The 12 output types are listed on the front panel in the left-hand vertical column titled TYPE.
The vertical row of 12 white LEDs to the right of that column will update and illuminate to indicate the
output type that has been selected.
4) CLOCK DIV/MULT
The CLOCK DIV/MULT knob sets the timing of the output type assigned to the selected output.
This timing is a division or a multiple of the master tempo.
The 12 timing divisions are listed on the front panel in the middle vertical column titled DIV.
The vertical row of 12 white LEDs to the right of that column will update and illuminate to indicate the
clock division/multiple that has been selected.
5) PHASE OFFSET
The PHASE OFFSET knob sets a phase offset for the output you are editing. Phase offset is expressed
in degrees or as a fraction of the total time of the clock division.
The 12 offset options are listed on the front panel in the right-hand vertical column titled OFFS.
The vertical row of 12 white LEDs to the right of that column will update and illuminate to indicate the
phase offset that has been selected.
© 2016 Abstract Data Ltd.
Page 6 of 15
Version 1.1.3