Dam Easy Flood Barriers DME01 Руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Устройство защиты Dam Easy Flood Barriers DME01. Dam Easy Flood Barriers DME01 13 страниц.
Печатать страницуSECTION B: Do's and Don'ts – Safety
PLEASE READ CAREFULLY
Basic safety precautions
• This barrier is designed for use within
external reveals of suitable doorways.
780mm –1100mm
See Section A Flood Barrier Specifications
30.7in – 43.3in
for description of suitable doorways
• For installing, removing, maintaining and
2.0
storing, use as detailed in this instruction
1.0
3.0
0
4.0
manual, retain for future use (available to
download www.dameasyfloodbarriers.com)
• The barrier weighs 19.7kg/43.4lb, take care
when lifting – 2 people may be needed to
lift the barrier safely
• Complete a full trial installation of the
barrier in the doorway that requires flood
protection, prior to a risk of flooding.
While the Barrier is 'in use'
1100mm –3300mm
(Installing, Removing, Maintaining & Storing)
43.3in – 129.9in
Do's
• Follow these instructions carefully, see
demonstration videos available online
www.dameasyfloodbarriers.com
• Wear gloves to prevent injury from
pinch points and contamination from
2.0
flood water
1.0
3.0
0
4.0
• Lift only from the Lifting Handles
indicated to avoid damaging the barrier
• When the barrier is installed and
there is a risk of flooding, monitor air
pressure regularily
• To avoid damaging the inflatable seal,
always place the barrier on an even
surface
1100mm –3300mm
43.3in – 129.9in
6
• Flood water may be contaminated, always
use gloves and eye protection and carefully
clean and dry the barrier thoroughly if it has
been in contact with flood water
• Clear dirt and debris from the reveals and
repair any cracks or damage to ensure a
watertight seal
• Flood water can enter a property from other
access points, see Section I Accessories for
additional flood protection products and seek
professional advice for suitable protection for
your property
• Store the barrier as directed, in the original
packaging away from direct sunlight and
extremes of temperature
Don'ts
• DO NOT use any tools while installing,
removing, maintaining or cleaning the barrier.
Use of tools may damage the seal and will
invalidate the warranty
• DO NOT install the barrier in a door frame,
2.0
a watertight seal cannot be guaranteed
1.0
3.0
between the reveal and the frame
0
4.0
• DO NOT lift by the pump handle
• Never inflate the seal when the barrier is not
secure in a doorway
• DO NOT deflate the seal or retract the side
panels when the barrier is installed in a
doorway until water receeds
• DO NOT allow any detergents or any chemicals
to come into contact with the barrier
FOR SINGLE BARRIER INSTALLATION
FOLLOW STEPS 1A, 2A AND 3
FOR MULTIPLE BARRIERS
FOLLOW STEPS 1B, 2B AND 3
STEP 1A: POSITION A SINGLE BARRIER
780mm –1100mm
30.7in – 43.3in
1A.1 Clear any dirt or debris from the doorstep
and reveals. For an enhanced seal, double
over filler to create a thick strip.
1A.3 Wearing gloves, remove the barrier
1100mm –3300mm
from the reusable packaging. Help from
43.3in – 129.9in
another person may be needed to lift
safely (lift only at the Lifting Handles
marked)
Wear gloves while installing, removing and maintaining the barrier to avoid injury
CAUTION/
Always hold the Barrier firmly at the lifting handles when not secure in a doorway
IMPORTANT
780mm –1100mm
SECTION C: Installing the barrier(s)
Exterior view of Dam Easy
®
Interior view of Dam Easy
Flood Barrier installed
Flood Barrier installed
780mm –1100mm
780mm –1100mm
30.7in – 43.3in
780mm –1100mm
30.7in – 43.3in
1A.2 Place filler at each corner of the doorstep
1100mm –3300mm
43.3in – 129.9in
in line with the barrier position
1100mm –3300mm
43.3in – 129.9in
1A.4 Position the barrier vertically, between
the reveals in the centre of the doorway
(Ratchet Handle facing inwards). Hold the
Barrier firmly in place at the Lifting Handles
until secure within the reveals
®
30.7in – 43.3in
1100mm –
43.3in –
7