ADDER ADDERLink INFINITY 1100 Быстрый старт - Страница 2
Просмотреть онлайн или скачать pdf Быстрый старт для Удлинитель ADDER ADDERLink INFINITY 1100. ADDER ADDERLink INFINITY 1100 2 страницы.
Печатать страницуConnections
Main status indicators
Green
All services present.
Amber
Running but video, USB or network link missing.
Red
Booting before processor loaded or failed.
Red rapid flash
Critical error has been detected (a message will
also be displayed within the OSD.)
Blue
Factory reset mode active.
Red/green flash
Booting into factory recovery mode.
Green/blue flash
Upgrade mode active.
Fast green flash
Identify mode active.
Teaming
ALIF units are ready to automatically invoke teaming whenever the
CATx and SFP (with either CATx or fiber modules installed) ports are
both used to link transmitters and receivers. Teaming potentially
doubles the available bandwidth for video intensive applications and
also provides redundancy in case one link is lost.
* The units benefit from multiple audio signal streams:
• Uni-directional analog audio - from the host
PCs jack socket,
• Uni-directional digital audio - via the video
connection,
• Bi-directional digital audio - via the USB
connection (converted to/from analog).
To perform a manual factory reset
A factory reset returns ALIF unit to its default configuration.
1 Power on the ALIF unit.
2 Use a long narrow implement (e.g. a straightened-out paper clip) to press-and-hold the recessed
reset button on the front panel for roughly ten seconds, until the status indicator turns blue (Note:
alternating red/green indications will occur during the ten second period while the button is still pressed).
3 Release the reset switch. The indicator will change to red for a short while (less than ten seconds)
and then back to blue while ALIF unit performs the reset and should then change to an alternative
color, usually orange initially, signifying that the operation is complete.
Note: If you are performing a factory reset and intend to disconnect the power immediately after the reset,
you must wait at least 30 seconds after you have released the reset button for it to complete the process.
Note: The images shown here
are for ALIF2100. ALIF1100
units are slightly different in
appearance but connect and
operate in the same way.