Dan D'Agostino Momentum Руководство пользователя - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя для Усилитель Dan D'Agostino Momentum. Dan D'Agostino Momentum 15 страниц. Hd preamplifier
Также для Dan D'Agostino Momentum: Руководство пользователя (13 страниц), Руководство пользователя (13 страниц), Руководство пользователя (10 страниц), Руководство пользователя (11 страниц), Руководство пользователя (11 страниц)

MAKING CoNNeCtIoNs to

the MoMeNtUM PreAMPlIfIer

Interconnect cables

We recommend the use of high-quality balanced XLR audio interconnect cables with the

Momentum preamp. if you have a source device that does not offer XLR connections, please

contact your D'Agostino Master Audio Systems dealer to acquire the proper XLR-to-RCA

adapters. Do not use XLR-to-RCA adapters to connect the preamp to your amplifier—use only

an amplifier with XLR balanced inputs.

First connect the source devices (phono preamp, CD player, etc.) to the appropriate inputs.

Connect each XLR cable (or XLR-to-RCA adapter) to the appropriate XLR jack by pushing the

plug into the jack. To release the plug, push on the small tab atop the jack and gently detach the

plug. never grasp interconnect cables by the cable itself—you could damage the cable. Be sure to

connect left channel to left channel, right channel to right channel.

note that the Momentum Preamplifier does not incorporate a phono stage; you will have to add

an external phono stage in order to use the Momentum with a turntable. We recommend getting

a phono stage of the best possible quality in order to get the best from the Momentum.

now connect the Momentum's line outputs to your amplifier. Connect each XLR cable to the

input by pushing the cable onto the jack. To release the XLR cable, push on the small tab on the

top of the plug, then grasp the cable by the plug and gently pull it out.

Power supply connector cable

The Momentum preamp is supplied with a special power connector cable that connects the

power supply to the preamp main chassis. The connectors are surrounded with a collar. To

connect them, pull back on the collar, push the connector onto the jack on the power supply

or the preamp, then release the collar. To disconnect them, slide the collar back to unlock the

connector, then pull the connector loose.

Be sure to hook up the power supply connector cable before you connect the power supply to

the AC outlet.

AC cord

The Momentum preamp power supply is supplied with a high-quality AC cord tipped with a

15-amp ieC connector at the preamp end and a three-conductor AC plug at the other end.

You may use a different power cord with the Momentum if you wish, as long as it is tipped with

a 15-amp ieC connector and a three-conductor AC plug.

After the speaker, interconnect cables, and power supply connector cable are connected, push

the ieC connector on the power cord into the ieC jack on the Momentum preamp.

12-volt trigger outputs

These 3.5 mm jacks emit a 12-volt DC control signal when the preamp is on. You can connect

them to any devices that take a 12-volt DC control input, such as an amplifier.